legacycentral bbs

Posted: **Sun Aug 10, 2008 11:04 pm**

http://www.main.experiencetherave.com/i ... adyxt2.jpg
http://www.main.experiencetherave.com/i ... adyxt3.jpg

More stuff added The stuff in these pictures is free + shipping. If you see something you want, let me know. It will get trashed in a week or two.
http://www.main.experiencetherave.com/s ... ages/free/

Posted: **Sun Aug 10, 2008 11:12 pm**

Josh,
Is the 90' turbo inlet in that collection?..this one:
http://bbs.legacycentral.org/viewtopic.php?t=36761

dibs if you do!

....Also interested in the smaller trans cooler...plug and play on the 2.2/2.2T?

Thanks,
Td

Posted: **Sun Aug 10, 2008 11:24 pm**

That may be in another box I have yet to go through. I'll let ya know when/if I find it.

As for the trans cooler, I think it should work fine. You could tap into the line at the radiator. I'd suggest going to the external cooler first, back to the radiator, and then back to the trans. That way during the winter the radiator will hopefully not let the trans fluid get too cold. I believe I have some hoses that came with the cooler. I'll include those.

Posted: **Sun Aug 10, 2008 11:48 pm**

Josh, there's a few things I'd like to get from the "free" section:

#8437-sensor
#8439-intake
#8442-AC lines
#8445-AC compressor, alternator (can you ID both for me, please)
#8446-air filter box (does the air exit at a 45* or 90* angle from the box?) (also, what's in the box that's in the box with the air filter box--oh boy, that sounds intelligent)

I'll also take the larger of the trans coolers, please.

BTW, is the STi trans mount for AT or MT? Depends on what it's for, I might take it too.

Thanks!

Posted: **Sun Aug 10, 2008 11:56 pm**

Can you link the pictures.

Posted: **Mon Aug 11, 2008 12:01 am**

Sent PM regarding linking pics.

Posted: **Mon Aug 11, 2008 12:17 am**

http://www.main.experiencetherave.com/s ... P_8437.JPG sensor

http://www.main.experiencetherave.com/s ... P_8439.JPG intake

http://www.main.experiencetherave.com/s ... P_8442.JPG AC lines

http://www.main.experiencetherave.com/s ... P_8445.JPG AC compressor and alternator

http://www.main.experiencetherave.com/s ... P_8446.JPG air filter box and the other item in the box with the air filter box

Posted: **Mon Aug 11, 2008 12:23 am**

Thanks, that worked.

Note on the ac lines. One of the intake lines only works on the newer style compressor. So not sure if you want that. As for the compressor & alternator, I have no idea if they work, just to let you know.

I'm going to keep the air filter box until I finish my link install because I'm not sure if I'm going to need those parts.

Posted: **Mon Aug 11, 2008 12:27 am**

Regarding the compressor, which brand is it--Calsonic or Zexel? And the item in the box inside the box with the air filter box--is that another AC compressor?

As regards the AC lines, that's fine with me, I'll take them and I'll just get the alternator checked out before I install it.

Thanks!

Posted: **Mon Aug 11, 2008 2:45 am**

I'll have to check. I'm not sure which one it is. I do know one is from the turbo motor....condition unknown, and I think the other one may be the original compressor from my car, which was knocking, so I don't think you'd want that one.

I'll try and look tomorrow and let you know for sure.

Posted: **Mon Aug 11, 2008 5:43 am**

i'm interested in the STi Trans mount (if it'll fit a 92 NA 5MT) and that 10 piece t handle mm hex key set

Thanks!

Posted: **Mon Aug 11, 2008 2:35 pm**

From the free pile:

Trunk washer bottle & pump (the one with the long neck)
Crank Pulley (hidden in http://www.main.experiencetherave.com/s ... P_8445.JPG )

I also see that your radio trim from the Impreza is cracked. Mine broke in the exact same spot! Crappy plastic. Just let me know what shipping is for both of them.

Thanks, Nate

Posted: **Mon Aug 11, 2008 6:43 pm**

NuclearBacon wrote:i'm interested in the STi Trans mount (if it'll fit a 92 NA 5MT) and that 10 piece t handle mm hex key set

Thanks!

Yes the STi trans mount will fit your 92 n/a 5mt as long as it's AWD, which I assume it is.

I'll try and get things sorted out and start boxing up for shipping costs.

Please email me rather then PM your address or zip to calculate shipping costs.

Posted: **Mon Aug 11, 2008 6:44 pm**

n2x4 wrote:From the free pile:

Trunk washer bottle & pump (the one with the long neck)
Crank Pulley (hidden in http://www.main.experiencetherave.com/s ... P_8445.JPG )

I also see that your radio trim from the Impreza is cracked. Mine broke in the exact same spot! Crappy plastic. Just let me know what shipping is for both of them.

Thanks, Nate

Yeah that was the old piece. I have a new one in there now.

I'll box those two up. Email me your address or zip so I can calculate shipping costs.

Thanks

Posted: **Tue Aug 12, 2008 3:02 am**

93Leg-c wrote:Regarding the compressor, which brand is it--Calsonic or Zexel? And the item in the box inside the box with the air filter box--is that another AC compressor?

As regards the AC lines, that's fine with me, I'll take them and I'll just get the alternator checked out before I install it.

Thanks!

Both compressors are Calsonic

One is part # 73011AA031 which is from a 91 MY
Other is 73011AA090 which is from a 92-93 MY

I'm pretty sure the 91 was in my car previously with knocking issues. So unless you want a soon to be dead compressor I wouldn't recommend shipping something that heavy. The 92-93 one came off the turbo motor. I don't know the condition.

Also, I'm sorry I just now saw your comment on the STi trans mount. It is for a 5MT. Luigi said he was interested in it though....

Posted: **Tue Aug 12, 2008 3:18 am**

Are those the hard lines for an awic setup in the middle of the first picture? If So I could use those.

Jeff

Posted: **Tue Aug 12, 2008 3:27 am**

Josh ill take the engine cover ill shoot you a PM so we can arrange shipping and payment. Thanks

http://www.main.experiencetherave.com/s ... P_8438.JPG

Posted: **Tue Aug 12, 2008 3:29 am**

jefferson wrote:Are those the hard lines for an awic setup in the middle of the first picture? If So I could use those.

Jeff

Yes they are the hard lines for the AWIC setup.

Posted: **Tue Aug 12, 2008 2:30 pm**

What's this?

Posted: **Tue Aug 12, 2008 3:55 pm**

I'll take the small trans cooler. Thanks

Posted: **Tue Aug 12, 2008 5:55 pm**

kimokalihi wrote:What's this?

http://www.main.experiencetherave.com/s ... P_8433.JPG

That is a sunglass/glasses holder case that the guy who did my AWIC radiator sent along with the radiator. He probably got a whole bunch from someone and sends them out with his stuff.....I don't know.

Posted: **Tue Aug 12, 2008 5:57 pm**

wtdash wrote:I'll take the small trans cooler. Thanks

Todd, I'll try and get it boxed up and total cost to you this afternoon.

Thanks

Posted: **Wed Aug 13, 2008 12:50 am**

15 bucks for the metal coolant tank?

Posted: **Wed Aug 13, 2008 3:48 am**

Arctic Assassian wrote:15 bucks for the metal coolant tank?

Where do you see a metal coolant tank?

Posted: **Wed Aug 13, 2008 3:51 am**

I've added another unknown, probably bad ac compressor to the free pile, and a set of AC gauges. Manifold is good, all you need is a new set of hoses/fittings.

I also took some more stuff out of the free box and took pictures. So let me know if there's anything you may want that was covered up. Also, to note the power steering pump is missing a spring on the discharge regulator, so it doesn't technically work as is.

Also, I found the coupler piece I bought from Laurel a while back for the bypass valve. - $25

http://www.main.experiencetherave.com/s ... lvesplice/

legacycentral bbs

Garage Sale.....everything must go!!! (PARTS ADDED)

Garage Sale.....everything must go!!! (PARTS ADDED)