legacycentral bbs

Posted: **Sat Sep 06, 2008 8:33 am**

its from a 97-00 wrx...will it fit without problems?

Posted: **Sat Sep 06, 2008 2:08 pm**

Nope. Length and hanger position (muffler)are different. A good exhaust shop can modify it for a small fee.

Posted: **Sat Sep 06, 2008 6:37 pm**

ok.. it has an adjustable middle hanger.. the type that goes around the 3in. piping and bolts together to hold in place...

and btw Casey(hardware89) its 3 in piping.. and when we install it we will see how close it is... if it crazy far, we probably can just take it to a welding shop in copper and they can fix it for cheap...

Posted: **Sun Sep 07, 2008 12:58 am**

it 3 inch...where did i get 2.5,,,lol

Posted: **Sun Sep 07, 2008 1:32 am**

lol.. loser!

Posted: **Sun Sep 07, 2008 2:49 am**

why hate man lol

Posted: **Sun Sep 07, 2008 6:49 am**

no hate all love lol

Posted: **Sun Oct 05, 2008 4:45 pm**

I know this isn't a new thread, but I just wanted to say that if the exhaust is stock, it isn't even close to 3" in diameter. Internal on a WRX is closer to 2" even.

Unless of course it's aftermarket, in which case, carry on.

Posted: **Sun Oct 05, 2008 5:53 pm**

I had to fit a 3" turbo-back to my 91 SS. It required a LOT of modification and about 14" of pipe added to it to get it out to the bumper. All the hangers had to be moved and then it tool about 4 hours of fitting and TIG welding with the car on a friends lift to make it fit correctly.

It came with the car so I didn't have a choice.

GD

Posted: **Wed Oct 08, 2008 9:41 am**

for this one it took like 30 mins of welding, and 5 inches of exhaust

legacycentral bbs

thinking about getting a 2.5 inch catback exhaust

thinking about getting a 2.5 inch catback exhaust