Page 1 of 1
FREE-Wrecked 1991 Turbo Sedan
Posted: Sun Oct 05, 2008 12:54 am
by head2wind
Located Bellingham WA. its up on a trailer as all the running gear is gone. front damaged in front of the strut towers. firewall back is in good to excellent condition. engine and trans are gone. interior is mostly there and in good condition.
pictures here:
http://picasaweb.google.com/Head2Wind/91Subie#
I want this car to go whole, I will not part it any more. lots of good parts still here so someone local needs to get this.
I can offer to pull it to your location with my truck and trailer for the cost of fuel within 100 mile or so of 98226. we could also transfer it to another trailer if you are coming from farther away.
Ken
360.927.1954
In 2 weeks if someone doesn't take it i will be taking it to the crusher.
no parts
Posted: Sun Oct 05, 2008 2:23 am
by kleinkid
I know you said no parting out, but, if that chrome strip around the rear bumper is any good, and you can get it off ok, I would buy that from you, and come and get it, or meet you at the Oak Harbor campus when you are there. Also, I am looking for some DOHC heads to go with a EJ20R intake manifold I am getting. Later, John.
Posted: Sun Oct 05, 2008 2:45 am
by head2wind
you are welcome to come get it. if I have time I will look at getting it off and how much of a PITA it will be.
Looks like the whole rear bumper has to come off then the skin, then its possible to get to that trim...... if it stops raining long enough I will get out there and pull it. otherwise its up to you.
give me a call and we can figure something out.
Ken
360.927.1954
Re: no parts
Posted: Sun Oct 05, 2008 3:08 am
by dropdfocus
kleinkid wrote:Also, I am looking for some DOHC heads to go with a EJ20R intake manifold I am getting. Later, John.
PM'd you about heads I have available.
(didn't mean to cut in on the free car post)
Posted: Sun Oct 05, 2008 3:18 am
by head2wind
to cut back in, I too have a set of EJ20G heads, manifold, injectors, belt covers that I don't think that I am going to get to..... will they work for what you are doing John?
Posted: Sun Oct 05, 2008 3:20 am
by dropdfocus
That's what he's looking for. I have USDM DOHC heads.
Posted: Sun Oct 05, 2008 3:24 am
by head2wind
what vintage USDM heads ????
Posted: Sun Oct 05, 2008 3:25 am
by dropdfocus
EJ25D heads & intake manifold from a buddy.
Posted: Sun Oct 12, 2008 5:46 am
by head2wind
sawsall starts next weekend..... I will consider pulling parts for anyone that is interested. It has a set of nice doors, trunk, rear bumper/wrap, full interior, main wire harness......
ya want these? come get them off the car before I have to make them go away to the crusher
Posted: Sun Oct 12, 2008 6:09 am
by evolutionmovement
FYI, the chrome bumper strip should come right out if you can get a screwdriver behind it near one of the ends and pry a little of it out, then you can just pull the thing off going around the car. It's just double-sided taped.
Posted: Sun Oct 12, 2008 6:14 am
by head2wind
he decided to go with a new one.
Posted: Sun Oct 12, 2008 5:07 pm
by ericem
You can get just the chrome strip?? Perfect!
Posted: Mon Oct 13, 2008 12:39 am
by kimokalihi
I would take the car but as far as I know all I need is the wing. My wing the paint is chipping off. Will the junkyards take this car without charging you? Or will they take it at all?
Posted: Mon Oct 13, 2008 5:12 am
by head2wind
I can pull the wing. you pay for shipping.
Posted: Mon Oct 13, 2008 1:17 pm
by kimokalihi
I will gladly pay for shipping as long as the paint on the wing is in good condition. I'll even pay you for the wing. I need the mounting hardware for it too. The guy sold me the car without the nuts or whatever. You can pull one side of the wing up off the car with your hand.
Posted: Tue Oct 14, 2008 4:02 am
by AWD_addict
You still have this car? PM sent about parts.
Posted: Fri Oct 17, 2008 4:43 am
by ScottyS
That is really a shame you're not closer!
If you are at all interested in pulling the rear drivers tailight assembly, my white 91 SS needs a crack-free one. Let me know if and how much.
Posted: Fri Oct 17, 2008 5:47 pm
by head2wind
I will pull it and put your name on it, I will PM you a price.
I just found out that I need to cut it into pieces to get rid of it. So I will be pulling all the good stuff off and offering it up. I was trying to avoid all the work, however no one has stepped up for the whole thing.
Posted: Fri Oct 17, 2008 5:50 pm
by ScottyS
OK, thanks!
Posted: Sat Oct 18, 2008 1:22 am
by pw422
Are willing to cut out the rear quarter panels and ship?
Posted: Tue Oct 21, 2008 6:04 am
by head2wind
IF and it is big IF I even consider trying to cut and ship the rear quarters I need to know where you would like them cut at.
Posted: Tue Oct 21, 2008 6:06 am
by head2wind
ScottyS wrote:That is really a shame you're not closer!
If you are at all interested in pulling the rear drivers tailight assembly, my white 91 SS needs a crack-free one. Let me know if and how much.
lense is out, I will prep for shipping as soon as I know where it is going. $15 for the fixture + real shipping
Posted: Tue Oct 21, 2008 11:16 am
by pw422
pm ya
Posted: Tue Oct 21, 2008 5:53 pm
by ScottyS
head2wind wrote:ScottyS wrote:That is really a shame you're not closer!
If you are at all interested in pulling the rear drivers tailight assembly, my white 91 SS needs a crack-free one. Let me know if and how much.
lense is out, I will prep for shipping as soon as I know where it is going. $15 for the fixture + real shipping
Yeah! pm INCOMING.