Page 1 of 1

Time to unload a few things

Posted: Mon Nov 03, 2008 6:50 am
by PhyrraM
More to come, so keep checking back.

All prices are my un-educated guesstimates. Feel free to make offers.

First up is an authentic JDM intake filterbox. While this may appear to be exactly the same as our USDM filterboxes, rest assured it is only the same in function only. Comes with an origninal OE JDM Subaru air-filter! It's used but still has at least 10 miles of usable life left in it. This not-as-rare-as-I'd-like-you to-think airbox has got to be good for AT LEAST as much HP as your factory one. Does have a broken clip for a hose, not sure if it's even used on the USDM cars. Great if you need a spare for expirementing or a fast swap if you are playing with the JECS AFM.

$20+shipping?
Image
Image
Image
Image


Next we have a factory Clarion radio w/CD player. Works fine, even the CD player. A few blemishes, but very presentable. Comes with the DIN side mounting brackets.

$100+shipping
Image
Image
Image
Image
Image


Airbag module. Great un-exploded condition. Pop yours? Need a replacement, or a spare? Not sure how many of these are left in circulation.

$120?
Image
Image
Image
Image


EJ25D intake manifold. This particular one is supposedly from a '98 2.5RS. Has EGR valve, throttlebody, injector/fuel rails, IAC valve. Layout is basically the same as the EJ22T intake manifold. An EJ22t harness and coilpack would drop on this thing. Could be a great DOHC donor manifold for a project. TPS has a different connector, but an EJ22T thottlebody (w/TPS) is a bolt on. Might need to get a bit creative with the TB/IAC water lines an the PCV lines. If your already planning on a catch-can setup--perfect!

$150+shipping
Image
Image
Image
Image
Image
Image


Airbag steering wheel. A bit rough on the outside, but I've seen worse. Rewrap it while you still drive with yours.

$30
Image
Image
Image
Image
Image
Image
Image
Image



Hi-rez pics here: http://flickr.com/photos/23291496@N04/s ... 605899752/ Click on "all sizes"

Posted: Mon Nov 03, 2008 2:26 pm
by kimokalihi
You're funny.
It's used but still has at least 10 miles of usable life left in it.

Posted: Mon Nov 03, 2008 5:03 pm
by smh0101
Would you separate the fuel rails from the intake manifold?

Posted: Mon Nov 03, 2008 6:29 pm
by PhyrraM
smh0101 wrote:Would you separate the fuel rails from the intake manifold?
Not at this time, but keep checking in. I've got some fuel rails in the barn. They might even be the right ones!

Also, if the manifold doesn't sell I will sell just the rails and dump the aluminum hunk.

Posted: Mon Nov 03, 2008 7:47 pm
by smh0101
Well, I have the aluminum hunk... I just need the IAC and Fuel Rails, so if you wanna ditch the hunk... I'll take the other two.

:)

Posted: Wed Dec 10, 2008 9:25 pm
by smh0101
Free bump.

(I still want the rails! lol)