Page 1 of 1
Jhot JDM Slanty TMIC '94 WRX on Ebay
Posted: Sat Nov 08, 2008 7:19 am
by Aerotech
This is the same one I'm running right now, one of the VERY few TMICs that will bolt onto the Legacy Turbo without modifying the car or the IC (you may have to move the ignitor, that's about it)
EBAY LINK
Posted: Sat Nov 08, 2008 7:55 am
by PhyrraM
Looks like the higher flowing STI unit.
Posted: Sat Nov 08, 2008 6:10 pm
by wtdash
Do these connect to the VF11 or TD04 better?
Or more fabbing?
Thanks
Posted: Sun Nov 09, 2008 4:44 am
by Aerotech
With a VF-11 it will be just about bolt-on.
TD-04 is a different story, the outlet is more horizontal, and a bit too long, and you need to make the 90-deg. inlet as well.
I had one on my car for a few years, I cut down the outlet about an inch, used a silicone 90-deg for the inlet. It suits the motor very well, pulls smoother than the stock turbo. I ran about 11psi, car really scooted.
Posted: Sun Nov 09, 2008 5:23 am
by gene4ace
heres another one from an ej20g non sti very good intercooler with no mods to fit the ej22t
link!