Page 1 of 1
FS: Yellow 480cc injectors and rails(sold)
Posted: Thu Nov 13, 2008 7:22 am
by bmxpunk
SO trying to get my project going I amassed a collection of ej20K rails and injectors. I finally figured something out so I have a complete set to sell.
Looking for $100 Shipped Sold
Posted: Thu Nov 13, 2008 8:42 am
by gene4ace
You might wanna tell people that ej20k has special rails for only the v3-v4 wrx/st(and the twin turbo legacys ej20r)
the injectors are phase 1 bump for a rare set of parts
Posted: Thu Nov 13, 2008 4:28 pm
by bmxpunk
Very true, but the injectors do drop straight into the rails for the ej22t
Posted: Thu Nov 13, 2008 6:41 pm
by wtdash
Will the stock ECU run these?
Thanks
Posted: Thu Nov 13, 2008 6:56 pm
by 94SS_Canada
wtdash wrote:Will the stock ECU run these?
Thanks
No, you are far past the "max-out" point.
Posted: Thu Nov 13, 2008 7:05 pm
by skid542
^^^ Yes and No.
The stock SS ecu can handle upwards of a 20% trim which puts these right at the limit. There are several memembers running the 440's without problems, others have had slight problems. Most of these guys are running the 16G turbo though with some form of air/fuel management i.e. SAFC-I or such. I would suggest some searching on the subject. If you were to drop them into a stock system, the SS ecu will be able to trim them pretty well but you may/may not have idle problems.
Posted: Sat Nov 15, 2008 5:59 am
by 93Leg-c
Lee, aren't bmxpunk's injectors 480cc's and not the 440cc's?
Posted: Sat Nov 15, 2008 6:26 pm
by bmxpunk
Yes 480's
INJ
Posted: Thu Nov 20, 2008 1:30 am
by def09
pm'd.
Posted: Wed Dec 31, 2008 2:41 am
by bmxpunk
SOrry I never got back to those who Pm'd me. I am still not getting emails from this site saying anyone replyed/ pm'd me.
so I wil be checking here everday now. any way... here are pics.
Please let me know if you want 'em.
Posted: Wed Dec 31, 2008 10:10 pm
by bmxpunk
SOLD!!!!