Page 1 of 1
t3/t4 AR .60 ball bearing turbocharger
Posted: Sun Nov 16, 2008 3:37 am
by worunner
Some guy in my town is selling a t3/t4 AR .60 ball bearing turbocharger (brand new) for 900. is it a good deal, and will it fit directly, or what extent of modification do i need to do?
Posted: Sun Nov 16, 2008 6:05 am
by dzx
well, to start, the flanges on the uppipe won't match the turbo. Then the intake on the t3/t4 is straight vs the 90 degree on the stock turbo. There's a chance the t3/t4 you're looking at is only oil cooled instead of oil and water. So you'd need a new intake system, rotated mount uppipe and downpipe for the t3/t4.
Posted: Tue Nov 18, 2008 9:09 am
by 93forestpearl
^ And that's just the pipe set. What about fuel, and controlling said fuel? This is granted you leave timing out of the equation. Then intercooling. How about a clutch? If an auto, reprogramming kit? You better have a wideband at the get go.
Posted: Tue Nov 18, 2008 2:19 pm
by kimokalihi
AKA not worth it.