legacycentral bbs

I'm looking into to getting some DOHC heads off of a 1997 legacy GT. I am wondering what else will need to be done to get these heads to work with the EJ22T block, will stock internals be ok or should i rebuild it. any suggestions are welcome.


thanks in advance.

Sticky at the top of the engine page

http://bbs.legacycentral.org/viewtopic.php?t=38247

The DOHC thread doesn't cover adding the oil/coolant passages to the USDM heads yet.

Essentially this is what you will need to do:

Pretty much, just the turbo oil return ( as shown by the pics), has to be "reworked".

Thanks for the visual Phyrra

Or you run it to the oil pan if you're not comfortable drilling into your cyl. head.