legacycentral bbs

Posted: **Wed Apr 29, 2009 6:57 am**

http://www.youtube.com/watch?v=j-zhISm_7Io
http://www.youtube.com/watch?v=qMnShkd11cY

Both were from a 3rd gear roll starting at 1200ish rpms. Boost is set at .9 bar.
I think the afr's look alright and I'm happy with how the stock ECU is running things.

Posted: **Wed Apr 29, 2009 7:21 am**

Looks 'bout the same with my 5th gear pull.

Posted: **Wed Apr 29, 2009 3:55 pm**

Is your wideband sending a simulated narrowband signal to your ECU, or are you running a narrowband alongside it?

Posted: **Wed Apr 29, 2009 4:55 pm**

Yes it is sending the simulated signal. Sorry I forgot the include that this is the sm-afr from PLX devices.

Posted: **Wed Apr 29, 2009 5:14 pm**

looks good to me, try not to go much more then 11.8 and less then 11.2 that is usully the sweet spot... under boost that is. try to do 4th gear pulls that is when the engine is under the most load.

legacycentral bbs

Vids of my wideband during 3rd gear pulls.

Vids of my wideband during 3rd gear pulls.