Page 1 of 1

FS: wiring harnesses

Posted: Wed May 13, 2009 6:36 pm
by Blackbart
Turbo 5mt wiring harness, from under the dash to the motor, right and left sides. Good shape but but one bundle under the hood was cut (have both sides). Headlight sockets missing. $150 plus shipping

N/A harness, 5mt, no cut wires, $50 plus shipping. 1990MY

Turbo 4eat harness, no cut wires, $100 plus shipping

Turbo 4eat complete body harness from tail lights to headlights, $150 plus shipping.

Turbo engine harness, just what you get on the motor itself, $50 plus shipping. 91's and 92/94's, specify which.

JDM ej20, right and left sides, some cut wires, may or may not be complete. Pretty jumbled up but the ends are labeled. $50 plus shipping.

Re: FS: wiring harnesses

Posted: Wed May 13, 2009 9:49 pm
by PhyrraM
Blackbart wrote: Turbo 4eat harness, no cut wires, $100 plus shipping

Turbo 4eat complete body harness from tail lights to headlights, $150 plus shipping.
I'm a little confused about what exactly is included in the first item.

The second one I assume is ALL the wiring from the car? Including the engine/intake manifold?

Sedans or wagons? Pre- or post- facelifts?

Posted: Wed May 13, 2009 11:15 pm
by Blackbart
The first one is everything from the dash to the motor, nothing off the motor (no motor harness) 92/94. The wire to the alt, a/c were cut but I have both ends. Sedan.

The second one is everything from the dash to the motor, nothing off the motor (no motor harness) 1990 n/a 5mt wagon. No cut wires

The full body harness is from a 92/94 SS 4eat.

The motor harness's are separate.