legacycentral bbs

I'm looking for injector electrical clips/couplers for USDM 04-06 550cc sti
injectors, or a place that sells them without having to buy the
whole wiring harness.

I found a conversion kit that I THINK may work for $99, which
comes with more than I need here.

http://www.deatschwerks.com/catalog/...roducts_id=194

I also found these but I'm not 100% sure there what we need:

http://www.horsepowerfreaks.com/part...ps/Denso/15254

Does anyone know of a vendor that just sells the clips complete with pigtails, cunductor pins, insulators, etc.

I just left voice-mails with both witchhunter.com and
deatschwerks.com asking the same thing.

I just found this.

Does this look like it will fit a USDM 2004-2006 STI injector?

http://www.bmotorsports.com/shop/produc ... cts_id/946

baddriver wrote:I just found this.

Does this look like it will fit a USDM 2004-2006 STI injector?

http://www.bmotorsports.com/shop/produc ... cts_id/946

Nope, won't work.

the later dohc nissans(240sx) and dohc 4 cylinder infinity(g20) use this style injector clip

also some later 300zx and q45 but those are harder to get too

I'm confused...I have injectors from a '04 STi right here and the EJ22T injector connectors plug right in. Am I missing something? (probably, lol)

SLODRIVE wrote:I'm confused...I have injectors from a '04 STi right here and the EJ22T injector connectors plug right in. Am I missing something? (probably, lol)

Thanks for the reply.

Well when I posted this my injectors were on order and my car was 70 miles away so I couldn't size everything up.


I did order connectors with pigtails that I don't need right now from Deutshwerks, but I was able to install the 550cc injectors to the NA fuel rails using the factory electrical connectors.