Page 1 of 1
FS in WA: Random Parts and some from an 00 RS
Posted: Sun Jul 26, 2009 4:51 am
by Project_Legacy
i know this is a legacy forum, but i have a few stuff i need to sell.
PARTS FROM AN 00 RS!!
TIC Throttle Body Spacer with Bracket $50 OBO
DDM Tuning H3 35W 3000k HID Kit! (Brand NEW!) $65
Whiteline Rear Subframe Lock Bolts (Brand NEW!) $20
Stock 00 RS Flywheel $25 OBO
Vibrant High Flow Cat Section (not direct bolt on for RS.. could be for earlier impreza or legacy??) $100 OBO?
Please PM me i am willing to make packaged deals. OBO on this stuff so please make offers. Thanks!
Posted: Sun Jul 26, 2009 11:33 am
by kimokalihi
What's this throttle body spacer all about and do you have a picture of it?
Posted: Sun Jul 26, 2009 11:57 am
by kimokalihi
I want that tranny mount. You've got pm.
Posted: Sun Jul 26, 2009 5:50 pm
by jdmleggy97
how much for shipping on wires? Also are they for phase 1 or 2?
Posted: Sun Jul 26, 2009 7:26 pm
by dropdfocus
A 2000 RS should have Phase II heads. 1998 & below received Phase I heads.
Posted: Mon Jul 27, 2009 2:29 am
by Project_Legacy
that is correct
Posted: Tue Jul 28, 2009 5:37 am
by Project_Legacy
bump. NEW PRICES
Posted: Sun Aug 02, 2009 11:12 am
by Project_Legacy
updated info..
Posted: Mon Aug 03, 2009 8:09 pm
by skid542
What condition is the flywheel in?
Thank you.
Posted: Tue Aug 04, 2009 7:13 am
by Project_Legacy
deleted pictures..
Posted: Tue Aug 04, 2009 7:01 pm
by skid542
I'm sorry, I should have more specific.
What condition is the stock flywheel in?
If I weren't going to put it on my OBW which I use off road and want a heavier flywheel, I'd be all over that lightweight. I have on in my SS and love it, definately makes a noticable difference over the stock flywheel. You're price on it is great - someone should snag it up!
Posted: Wed Aug 05, 2009 5:39 am
by Project_Legacy
o sorry, lol the stocker only has about 80k miles on it from when it was pulled. in excellent condition, although it got a little surface rust on it from after it got resurfaced. let me know what you wanna do. thanks
Posted: Wed Aug 05, 2009 12:14 pm
by dropdfocus
Posting up the weight of the flywheel should be handy info as well.
Posted: Thu Aug 06, 2009 12:23 pm
by kimokalihi
Did that guy buy the tranny mount?
Posted: Fri Aug 07, 2009 7:03 am
by Project_Legacy
yea sorry it was long gone..
Posted: Fri Aug 07, 2009 7:24 pm
by ScottyS
The STI axleback would need the hanger points relocated, that is all.
Posted: Sat Aug 08, 2009 5:08 am
by Project_Legacy
ahh good to know. thanks!
Posted: Sat Aug 08, 2009 12:36 pm
by dropdfocus
ScottyS wrote:The STI axleback would need the hanger points relocated, that is all.
You are only 50% correct on that. The 2 bolt flange is clocked differently for the Impreza chassis vs. the Legacy chassis. I have the exhaust off of my SS now & had the exhaust off of my wife's '98 LGT. On my garage floor I had an STi axle back, aftermarket 2.5RS axle back, and both stock Legacy exhausts. Legacy will not mate to an Impreza w/o rotating the Impreza axle back... The Legacy has bolt holes at 3 & 9 o'clock positions. The Imprezas for SOME stupid reason have their's clocked at 2 & 8.
So the flange at the end of the STi axle back needs to be rotated as well as have all 3 hanger mount locations changed. If you had the mid pipe from the STi, then the flange would be fine on the axle back, but the mid pipe is too long and needs shortened a few inches to make up for the difference.
Posted: Tue Aug 11, 2009 4:47 am
by Project_Legacy
make offers on this stuff please!! reasonable offers will not be refused!
Posted: Wed Aug 19, 2009 7:12 am
by Project_Legacy
updated list. greddy emanage and wrx front brake brackets are gone!!