Page 1 of 1
Anyone running a high CR?
Posted: Fri Nov 20, 2009 5:21 pm
by stef1825
Ok so here it goes; I have a spare ej22t wich I plan on rebuilding for autocross events and daily driving, I was thinking a slight higher compression ratio... Does anyone here run a higher compression ratio on their car?
please post info on you setup and how you like it!
thx !
Posted: Sun Nov 29, 2009 12:25 am
by stef1825
Come on! someone here has got to be running a compression ratio higher than stock! ....
Posted: Sun Nov 29, 2009 3:32 am
by SILINC3R
i have a slightly higher CR due to my heads being shaved but not sure what it is
Posted: Sun Nov 29, 2009 8:23 pm
by smh0101
I'm running 9.1:1... Stock is 8.1
ej253 block
STi Rods
CP Drop In STi Pistons
thin metal headgasket
ej25d heads
I love it... Makes more power on less boost, great off boost response... well... there really isnt any off boost ever... td04 spins hella quick
I'm figuring at about 8 lbs I'm at about 200 atw...
Reason I say this... Because at 8 lbs I was wasting 06-07 WRX fairly easy... And those are about 180-190 atw
I've upped the boost to 13lbs and jesus... Pulls like a raped ape. Cant wait to get a slightly bigger turbo on it to take the power up to 250-280 atw. Although tuning will definitely be critical.
Posted: Tue Dec 01, 2009 9:15 pm
by ScottyS
smh - that sounds like a great setup. You are running that with a PP6, correct?
Any higher CR's with the stock 22T block?
Posted: Tue Dec 01, 2009 9:49 pm
by smh0101
I have a PP6 to put in... But for now I'm still running stock.
AFRs were fine and I'm not knockin so I'm not gonna worry about it until I get a bigger turbo. Then I think I'll just go standalone.
And I'm on 440cc injectors.
Posted: Sat Dec 05, 2009 7:51 pm
by race_to_live
i just got some pistions from wiseco. 97.5mm(20 over). and when you order the pistions from them, unless they are custom pistions, you get 8.5. stock is 8.
and i think on average .007 is equal to 1cc. so when you deck the block or heads you might think about that.