legacycentral bbs

Where is the recommended jacking points for a floor-jack (front and
rear) and where should I place the jack-stands ?
I've checked the manual and Haynes, but they only refers to the small
jack used for changing wheels.

Thanks in advance

Jesper


------------------------ ---------------------~-~>
eGroups is now Yahoo! Groups
Click here for more details
http://click.egroups.com/1/11231/0/_/_/_/981030658/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

If you have a floor jack put it on the diff and start pumping then when you have the car up in the air put jack stands on the same points they reccomend for the "small jack used for changing wheels"

-Sambo

-----Original Message-----
From: jesper.kierkegaard@studsvik.se [mailto:jesper.kierkegaard@studsvik.se]
Sent: Thursday, February 01, 2001 4:31 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Jacking point


Where is the recommended jacking points for a floor-jack (front and
rear) and where should I place the jack-stands ?
I've checked the manual and Haynes, but they only refers to the small
jack used for changing wheels.

Thanks in advance

Jesper



To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com








<http://rd.yahoo.com/M=176325.1307935.29 ... omains.com>
Personalize your company´s name. Choose the domain name below and press SEARCH!

www.
<http://rd.yahoo.com/M=176325.1307935.29 ... omains.com> Yahoo! Domains
<http://us.adserver.yahoo.com/l?M=176325 ... =176385600>

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Disclaimer: Put chock blocks under all wheels on the floor, set the hand break, don't stick the car up unreasonably high in the air, don't work alone under a vehicle have someone there "just in case" etc.

-Sambo

-----Original Message-----
From: Barrett, Sam [mailto:samb@vitessa.net]
Sent: Thursday, February 01, 2001 9:20 AM
To: 'BC-BFLegacyWorks@yahoogroups.com'
Subject: RE: [BC-BFLegacyWorks] Jacking point


If you have a floor jack put it on the diff and start pumping then when you have the car up in the air put jack stands on the same points they reccomend for the "small jack used for changing wheels"

-Sambo

-----Original Message-----
From: jesper.kierkegaard@studsvik.se [mailto:jesper.kierkegaard@studsvik.se]
Sent: Thursday, February 01, 2001 4:31 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Jacking point


Where is the recommended jacking points for a floor-jack (front and
rear) and where should I place the jack-stands ?
I've checked the manual and Haynes, but they only refers to the small
jack used for changing wheels.

Thanks in advance

Jesper



To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com






To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com








<http://rd.yahoo.com/M=176325.1307935.29 ... .yahoo.com> <http://rd.yahoo.com/M=176325.1307935.29 ... .yahoo.com>


www.
<http://us.adserver.yahoo.com/l?M=176325 ... =794047565>

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com