legacycentral bbs

Posted: **Fri Dec 25, 2009 8:52 pm**

who makes a good set of pistons for the ej22t engine?

Posted: **Sat Dec 26, 2009 7:10 am**

wiseco

http://www.wiseco.com/Catalogs/SportCom ... Toyota.pdf

Posted: **Sat Dec 26, 2009 7:33 am**

My Wisecos have held up well over the years. Their noisyness depends on how loose your machine shop makes them.

Just make sure you gap the rings properly. Wiseco includes a nice sheet stating what kind of ring gap you should have based on goals.

Posted: **Sat Dec 26, 2009 4:11 pm**

I had the shop bore my engine fairly tight and they make no noise at all.

Posted: **Sun Dec 27, 2009 10:54 am**

Now did you just use ej22t pistons or like ej20 ones?

Posted: **Sun Dec 27, 2009 5:43 pm**

Ej22t forged pistons,they do make a kit just for our engines.bore it and drop them in.

Posted: **Sun Dec 27, 2009 6:42 pm**

did you find t?he kit on there site

Posted: **Mon Dec 28, 2009 2:40 am**

^ It is listed in their catalog. They have .020" or .040" overbore options, so the block must be bored and honed for installation.

If you are going through the trouble of a full engine teardown, bore, and rebuild, spend the $350 on a set of Eagle rods.