legacycentral bbs

So I've searched and found nothing. Sooooo.... does anyone know what the bolt pattern for an early 90's loyale wheel is? I have some old rally tires and want to find some rims to put them on so I can run them around in the snow

dont listen to me.

These are 4x140, according to a couple of sites. The 'Pugs' ( Peugeots) share the same size.

yes, they are 4x140.and the ONLY other option besides having them made, or finding a super rare set of original aftermarket rims for our car is peugot.......
you can have them made by a rim manufacture.but that gets spendy.

http://www.ultimatesubaru.org/forum/index.php

http://www.indysworld.com/80s/general/w ... heels.html
that page is a description of just about every 4x140 wheel there evar was......
you should go there for more info on that car.cheers, brian

You can knock out 2 of the studs and bolt up a 6 bolt toyota rim and then drill the other holes and have a whole bunch of options.Thats how i got swampers on my lifted wagon.



this is a diagram i made up years ago

DUDE! AWESOME! I am soooooo lifting my loyale!

Thanks for the tips. So, gijonas, did you draw that diagram in MS paint? Also, how did you install the studs for the new wheels and how does it ride on the road?

The car ride/rode like a facory car,not kidding.And yes,MS paint

or, you can drill the rims to be 4 lug.will only work with certain sets of rims, to be determined by the mounting surface style that is different with every manufacture........

i had six lug hubs on the back of both my brat, and my wagon, and they worked well.i had redrilled rims on the front of both vehicles as well.....and they worked well.and i am talkin , goin down the freeway off the pass at lke 85 well.......

[/img]http://i130.photobucket.com/albums/p241 ... 19.jpg[img]

[/img]