Testing the Water: Swapped 93 White T-leg sedan FS
Posted: Wed Jan 06, 2010 11:55 pm
I am not 100% yet on selling my car but I am looking at heading back to school full time and could use the money. I figured I would post it up and see if there was any interest.
It is a White 1993 Legacy turbo sedan that I have had for a couple years now. It is not a stock vehicle by any means and I have put in a lot of time and money into it. The car itself was eventually going to be my auto-cross track car just so you know the direction i was planning on taking with it. I have a parts list below and will post pictures once the snow stops. It is a very clean vehicle and i would hate to see it go but at the same time school is more important.
ENGINE:
Closed Deck EJ20G <100k on the motor
95/96 WRX DOHC Heads
converted to parrellel fuel setup with aeromotive regulator
Grimm Speed Phenolic manifold spacers
Early EJ20G Semi equal length exhaust manifold- DEI wrapped and sealed
Ulitmate Racing Upipe- DEI wrapped and Sealed
38mm tial wastegate- 8psi spring
VF22 IHI turbo- modified for external wastegate
HKS 3in downpipe- modified for wastegate return and relocated 02 bung
Custom 3in exhaust- loud but one of the better sounding exhausts I have heard
Turbo xs Front mount
Apexi dri-flow fliter
Power Enterprises Kevlar t-belt
Cusco Catch Can
Group N engine Mounts
Koyo Radiator
DRIVETRAIN
1999 2.5rs transmission- shifts AWESOME. In great shape
4.11 LSD rear end
South Bend TZ series Kevlar clutch and pressure plate
Unorthadox racing 11lb flywheel
Short Shifter with Ver4 Sti RA shift linkage
Group N transmission Mount
SUSPENSION
Ground Control coil sleeve kit with 490in/lbs and 450in/lb springs on KYB AGX struts
Suba performance front strut bar
Front Camber Bolts
INTERIOR
Manual Seat Belts
Nardi Steering Wheel
Blitz turbo timer
VDO Boost Gauge
very clean interior
EXTERIOR <170k on the body
EDM glass headlights with city lights
side skirts and rear lip not installed
painted 02-04 wrx wheels with ASX's
paint is in really good shape considering it is original from 1993
Like i said i will get pictures. Feel free to post up questions and pm me!
I am thinking about starting the price around 4500 OBO as there are a lot of parts here and the car is in great shape.
thanks
It is a White 1993 Legacy turbo sedan that I have had for a couple years now. It is not a stock vehicle by any means and I have put in a lot of time and money into it. The car itself was eventually going to be my auto-cross track car just so you know the direction i was planning on taking with it. I have a parts list below and will post pictures once the snow stops. It is a very clean vehicle and i would hate to see it go but at the same time school is more important.
ENGINE:
Closed Deck EJ20G <100k on the motor
95/96 WRX DOHC Heads
converted to parrellel fuel setup with aeromotive regulator
Grimm Speed Phenolic manifold spacers
Early EJ20G Semi equal length exhaust manifold- DEI wrapped and sealed
Ulitmate Racing Upipe- DEI wrapped and Sealed
38mm tial wastegate- 8psi spring
VF22 IHI turbo- modified for external wastegate
HKS 3in downpipe- modified for wastegate return and relocated 02 bung
Custom 3in exhaust- loud but one of the better sounding exhausts I have heard
Turbo xs Front mount
Apexi dri-flow fliter
Power Enterprises Kevlar t-belt
Cusco Catch Can
Group N engine Mounts
Koyo Radiator
DRIVETRAIN
1999 2.5rs transmission- shifts AWESOME. In great shape
4.11 LSD rear end
South Bend TZ series Kevlar clutch and pressure plate
Unorthadox racing 11lb flywheel
Short Shifter with Ver4 Sti RA shift linkage
Group N transmission Mount
SUSPENSION
Ground Control coil sleeve kit with 490in/lbs and 450in/lb springs on KYB AGX struts
Suba performance front strut bar
Front Camber Bolts
INTERIOR
Manual Seat Belts
Nardi Steering Wheel
Blitz turbo timer
VDO Boost Gauge
very clean interior
EXTERIOR <170k on the body
EDM glass headlights with city lights
side skirts and rear lip not installed
painted 02-04 wrx wheels with ASX's
paint is in really good shape considering it is original from 1993
Like i said i will get pictures. Feel free to post up questions and pm me!
I am thinking about starting the price around 4500 OBO as there are a lot of parts here and the car is in great shape.
thanks