Page 1 of 1
Various Subaru steering wheels
Posted: Sat Jan 23, 2010 11:16 am
by Reason
Posted: Sat Jan 23, 2010 10:17 pm
by kleinkid
Possibly a dumb question for some but, would the Nardi fit on my '91 and not mess with my cruise control etc? If it will work for me I should get it.
Posted: Sat Jan 23, 2010 10:40 pm
by evolutionmovement
What are the diameters of the 3-spoke Momo and Nardi? These should fit on a '96-99, right? (I don't care about the airbag)
Kleinkid, you might have to fab a bracket, but I can't say for sure. I could have rigged something up with the Grant I put on, but it didn't seem worth it.
Posted: Sun Jan 24, 2010 1:30 am
by Reason
I'll get the sizes up ASAP. As for what it will fit for your 91 I don't know. All I can do is tell you what they are off of and you can go from there.
As for cruz I have a wheel style kinda like that MOMO wheel in the middle. I took off my cruz from the stock wheel and mounted it in the stock position. It need a hole for the stalk to come out and there needed to be cutting to mount it properly, but it looks 100% stock, and I never do anything like that before.
Posted: Sun Jan 24, 2010 1:42 am
by evolutionmovement
Cool, yeah I'll be interested depending on the size. I'll have to do some research and see if I can find out about the interchange. Thanks.
Posted: Sun Jan 24, 2010 1:47 am
by Reason
The Nardi is off of an earlier WRX A-D models Diameter: 14.5"
The MOMO with the airbag is from a 96-97 Legacy Diameter: 15"
The MOMO w/o airbag is from a 93-95 RS Diameter: 14.5"
Posted: Sun Jan 24, 2010 6:37 am
by mike-tracy
I have the bottom MOMO one, and I really like it! Much better than the gross looking truck-sized stocker.
Posted: Sun Jan 24, 2010 6:49 am
by evolutionmovement
I imagine you mean inches. They're a little on the larger side of what I prefer. Thanks.
Posted: Sun Jan 24, 2010 7:41 am
by Reason
Yes inches my bad.
Posted: Wed Jan 27, 2010 9:28 am
by Reason
Going on NASIOC bump!
Posted: Thu Jan 28, 2010 9:49 am
by Reason
Sale pending on the MOMO wheel w/airbag.