Page 1 of 1
>WTB:1991 Legacy ABS control module
Posted: Thu Jan 28, 2010 11:56 pm
by gsglbc
the part number I need is
26771AA000, says "hydraulic UN" on it and is located on the passenger side of the firewall.
I'm on the west coast and my work phone # is 562 426 1106, Greg
thanks all!!
Posted: Fri Jan 29, 2010 2:49 pm
by Feign
I'm your huckleberry. I'll let you know when it's in my hands and ready to ship.
Posted: Fri Jan 29, 2010 4:27 pm
by gsglbc
awesome
Posted: Fri Jan 29, 2010 8:25 pm
by Feign
Well, I can't find anything like that. At least nothing with a part number on it.
Picture? Does it have four holes that those 10mm brake lines plug into?
Need this ASAP.
Posted: Fri Jan 29, 2010 10:28 pm
by gsglbc
pic or confirmation of the 4 10mm holes in a sec...
Posted: Tue Feb 02, 2010 6:29 am
by gsglbc
bump
abs
Posted: Tue Feb 02, 2010 9:18 am
by bepa
the difference between the early or late 1st generation legacy is the plugs. one has a round one and the other has a square one. the other plugs are the same. you should be able to use anyone from a 90 or 91.
if you have a 92-94 you would need one from these years. the number is not as important as the electrical connects are. so plug and play is what you want.
good luck and safe driving, Bepa
Posted: Tue Feb 02, 2010 4:15 pm
by gsglbc
thanks for the clarification bepa! next time I'm in brooklyn, let's meet 1/2way and I'll buy you a beer!