legacycentral bbs

Posted: **Wed Feb 07, 2001 12:59 am**

Cool.. where did u get them? and how much did it cost???

to improve the car in handling department, i am also looking for a
Cusco front and rear tower bar for the BC legacies.
on Dave's Turbo centric page, i know they make one for the wagons,
but not sure about sedans.. also, do u know if they make the lower
chassis brace?

--- In BC-BFLegacyWorks@y..., "Mark Ward" <mark_ward99@h...> wrote:
> They are the HR type. I have them set for full hard and quite
raised up for
> rally. They are quite stiff on the street due to the fact I am not
running
> the helper springs. They come with about 100 lbs springs to take
the minor
> bumps.
> Mark

------------------------ ---------------------~-~>
eGroups is now Yahoo! Groups
Click here for more details
http://click.egroups.com/1/11231/0/_/_/_/981525382/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Wed Feb 07, 2001 1:09 am**

They do make a front strut bar for the older legacies. I've been told that the older legacies are not real rigid, so adding stuff will help but you're goin to still get a decent amount flex compared to newer models. If you have wider tires, the bar will probably help. The rear doesn't have one I think...I know in my legacy....the rear seats don't fold down...and there is actually a square bar that goes across the opening to the trunk. I think I have pics of it on my website. www.personal.psu.edu/jcc189/subaru/subaru.html

If you want to improve handling...get a larger dia rear sway bar, and depending if you want more get a front one too. You usually want to get a larger rear one as it contributes more to the body roll, sway stuff like that. The front one plays more into with nose diving in corners or what not....they both the job they're suppose to...the rear just seems to help more when upgrading the bars.

************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************

-----Original Message-----
From: Ricky [ mailto:prostho@netscape.net]
Sent: Wednesday, February 07, 2001 12:56 AM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: Springs/Shock and Strut bar for Legacy.

Cool.. where did u get them? and how much did it cost???

to improve the car in handling department, i am also looking for a
Cusco front and rear tower bar for the BC legacies.
on Dave's Turbo centric page, i know they make one for the wagons,
but not sure about sedans.. also, do u know if they make the lower
chassis brace?

--- In BC-BFLegacyWorks@y..., "Mark Ward" <mark_ward99@h...> wrote:
> They are the HR type. I have them set for full hard and quite
raised up for
> rally. They are quite stiff on the street due to the fact I am not
running
> the helper springs. They come with about 100 lbs springs to take
the minor
> bumps.
> Mark

------------------------ ---------------------~-~>
eGroups is now Yahoo! Groups
Click here for more details
http://click.egroups.com/1/11231/0/_/_/_/981525382/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

<http://rd.yahoo.com/M=176325.1307935.29 ... .yahoo.com> <http://rd.yahoo.com/M=176325.1307935.29 ... .yahoo.com>

www.
<http://us.adserver.yahoo.com/l?M=176325 ... =651366617>

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Wed Feb 07, 2001 8:29 am**

yeah gab make a lower front brace looks real cool, if you look under file's
take a look at flat's postings he has done the works to his legacy, mine
will be the same. I hope hehe
----- Original Message -----
From: "Ricky" <prostho@netscape.net>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Wednesday, February 07, 2001 5:56 AM
Subject: [BC-BFLegacyWorks] Re: Springs/Shock and Strut bar for Legacy.

> Cool.. where did u get them? and how much did it cost???
>
> to improve the car in handling department, i am also looking for a
> Cusco front and rear tower bar for the BC legacies.
> on Dave's Turbo centric page, i know they make one for the wagons,
> but not sure about sedans.. also, do u know if they make the lower
> chassis brace?
>
>
>
> --- In BC-BFLegacyWorks@y..., "Mark Ward" <mark_ward99@h...> wrote:
> > They are the HR type. I have them set for full hard and quite
> raised up for
> > rally. They are quite stiff on the street due to the fact I am not
> running
> > the helper springs. They come with about 100 lbs springs to take
> the minor
> > bumps.
> > Mark
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>

------------------------ ---------------------~-~>
eGroups is now Yahoo! Groups
Click here for more details
http://click.egroups.com/1/11231/0/_/_/_/981552208/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Wed Feb 07, 2001 2:49 pm**

I got the TEIN Suspension from A&J Racing http://www.aj-racing.com here in
Vancouver. They retail for about $3000 Cdn, shocks, springs, helper springs
all 4. You can get strut bars froom cobb Tuning www.cobbtuning.com in Texas,
they do a lot of work with Legacys.

Mark
>From: "Ricky" <prostho@netscape.net>
>Reply-To: BC-BFLegacyWorks@yahoogroups.com
>To: BC-BFLegacyWorks@yahoogroups.com
>Subject: [BC-BFLegacyWorks] Re: Springs/Shock and Strut bar for Legacy.
>Date: Wed, 07 Feb 2001 05:56:18 -0000
>
>Cool.. where did u get them? and how much did it cost???
>
>to improve the car in handling department, i am also looking for a
>Cusco front and rear tower bar for the BC legacies.
>on Dave's Turbo centric page, i know they make one for the wagons,
>but not sure about sedans.. also, do u know if they make the lower
>chassis brace?
>
>
>
>--- In BC-BFLegacyWorks@y..., "Mark Ward" <mark_ward99@h...> wrote:
> > They are the HR type. I have them set for full hard and quite
>raised up for
> > rally. They are quite stiff on the street due to the fact I am not
>running
> > the helper springs. They come with about 100 lbs springs to take
>the minor
> > bumps.
> > Mark
>
>
>
>

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

------------------------ ---------------------~-~>
eGroups is now Yahoo! Groups
Click here for more details
http://click.egroups.com/1/11231/0/_/_/_/981574974/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Thu Feb 08, 2001 2:09 am**

Hey.. i am also from vancouver.. i actually live in Richmond... what
does your car look like??? maybe i have seen it somewhere.... i have
a white 94 Sedan.. totally stock looking right now.. maybe we could
meet up someday and look at each others car or something...

are u going to the Tbird rally??

--- In BC-BFLegacyWorks@y..., "Mark Ward" <mark_ward99@h...> wrote:
> I got the TEIN Suspension from A&J Racing http://www.aj-racing.com
here in
> Vancouver. They retail for about $3000 Cdn, shocks, springs, helper
springs
> all 4. You can get strut bars froom cobb Tuning www.cobbtuning.com
in Texas,
> they do a lot of work with Legacys.
>

------------------------ ---------------------~-~>
eGroups is now Yahoo! Groups
Click here for more details
http://click.egroups.com/1/11231/0/_/_/_/981616097/
---------------------------------------------------------------------_->

To unsubscribe from this group, send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com