FS 1995 Legacy L wagon and EJ22 engine part-put
Posted: Sun Apr 04, 2010 9:01 pm
I am selling my 1995 Legacy L wagon (AWD ABS) and parting out my spare motor. Please EMAIL me with questions and for pictures. I'm trying to be generous with pricing and will combine for shipping, lot pricing, etc. Just tell me what you want to buy and we'll come to some kind of agreement. Also- shipping service will be exactly as specified by the buyer (USPS, FedEx, UPS, Pony Express, rickshaw) and no "handling" charges. You pay for the postage- my time is free.
Thank you,
Brandon
bc@boa-us.com
1995 Subaru Legacy L (AWD, ABS) Mechanic owned and maintained. 180,000 miles. Just serviced motor last week with new: cam seals, crank seals, oil pump seal / gasket / o-ring, oil pan gasket, valve cover gaskets / grommets, re-sealed oil separator plate and piston pin access plate, new timing belt, new tensioner, oil change. Car has Subaru floor mats, aftermarket 15" wheels, and Kuhmo Solus tires have about 25,000 left on them. Windows are tinted 50% front, 35% all other windows.
Asking price is $3,000.
As for the engine part out- here is a list of the things I have for sale:
$5 items
3 sets of cam front covers
1 set of oil pump bolts
1 set of block bolts (holds the block halves together)
1 oil separator plate, plastic
1 set of plug wires
1 coolant crossover pipe w/ short hose, clamps, and bolts
1 turbo oil feed line
$10 items
1 crank pulley, grooved (accessory belt)
1 crank pulley, toothed (timing belt)
1 oil dipstick tube
2 oil fill tubes
1 eccentric pulley
1 orange idler pulley
1 toothed idler pulley
1 crank sensor
1 cam sensor
1 oil pickup tube
1 oil pressure switch
1 turbo-to-compressor elbow w/ bypass valve, plastic
1 thermostat water neck and thermostat
$25 items
1 ignitor
1 water pump
1 set valve covers
1 set of head bolts
1 set of motor mounts with bolts
1 A/C bracket set (4-bolt mound and 3-bolt mount)
Other items
Hydraulic tensioner $50 (item was purchased, installed, and immediately removed)
Complete intake manifold w/ throttle body, all bolts, injectors, sensors, etc $75
Thank you,
Brandon
bc@boa-us.com
1995 Subaru Legacy L (AWD, ABS) Mechanic owned and maintained. 180,000 miles. Just serviced motor last week with new: cam seals, crank seals, oil pump seal / gasket / o-ring, oil pan gasket, valve cover gaskets / grommets, re-sealed oil separator plate and piston pin access plate, new timing belt, new tensioner, oil change. Car has Subaru floor mats, aftermarket 15" wheels, and Kuhmo Solus tires have about 25,000 left on them. Windows are tinted 50% front, 35% all other windows.
Asking price is $3,000.
As for the engine part out- here is a list of the things I have for sale:
$5 items
3 sets of cam front covers
1 set of oil pump bolts
1 set of block bolts (holds the block halves together)
1 oil separator plate, plastic
1 set of plug wires
1 coolant crossover pipe w/ short hose, clamps, and bolts
1 turbo oil feed line
$10 items
1 crank pulley, grooved (accessory belt)
1 crank pulley, toothed (timing belt)
1 oil dipstick tube
2 oil fill tubes
1 eccentric pulley
1 orange idler pulley
1 toothed idler pulley
1 crank sensor
1 cam sensor
1 oil pickup tube
1 oil pressure switch
1 turbo-to-compressor elbow w/ bypass valve, plastic
1 thermostat water neck and thermostat
$25 items
1 ignitor
1 water pump
1 set valve covers
1 set of head bolts
1 set of motor mounts with bolts
1 A/C bracket set (4-bolt mound and 3-bolt mount)
Other items
Hydraulic tensioner $50 (item was purchased, installed, and immediately removed)
Complete intake manifold w/ throttle body, all bolts, injectors, sensors, etc $75