Page 1 of 1
R160 Subaru Clutch LSD with 3.70 gears Diff (ebay)
Posted: Mon Jun 14, 2010 11:06 pm
by Pooparu
Re: R160 Subaru Clutch LSD with 3.70 gears Diff (ebay)
Posted: Tue Jun 15, 2010 3:27 am
by dscoobydoo
Great, but you would have to use 06-07 WRX tranny
Re: R160 Subaru Clutch LSD with 3.70 gears Diff (ebay)
Posted: Tue Jun 15, 2010 3:37 am
by evolutionmovement
'06/'07 WRX were 3.7 and 1:1 front and centers? I thought the only 3.7 from the post GL era were the early fwd manuals. Sweet. Good to know.
Re: R160 Subaru Clutch LSD with 3.70 gears Diff (ebay)
Posted: Tue Jun 15, 2010 6:28 pm
by Pooparu
dscoobydoo wrote:Great, but you would have to use 06-07 WRX tranny
Or you could just swap the LSD into a 4.111 rear end. That would be an easier thing to do then replacing the transmission.
Re: R160 Subaru Clutch LSD with 3.70 gears Diff (ebay)
Posted: Wed Jun 16, 2010 7:26 am
by dscoobydoo
true.
Just depends on what you want to do with it.
Pooparu wrote:dscoobydoo wrote:Great, but you would have to use 06-07 WRX tranny
Or you could just swap the LSD into a 4.111 rear end. That would be an easier thing to do then replacing the transmission.
Re: R160 Subaru Clutch LSD with 3.70 gears Diff (ebay)
Posted: Wed Jun 16, 2010 1:19 pm
by n2x4
Swapping the diff isn't that difficult if you can check the backlash. Pull the retainers from the sides, remove rear diff cover, remove stub shafts and then the ring gear off the Clutch LSD. Then do the same for your stock diff (so you can retain the ratios you need). And bolt it all back together, but with the stock ring gear bolted to the Clutch diff in the stock diff housing.
I'd love to get my hands on one of those, but I think I'll continue hunting junkyards before I drop the money. Good find!
