Page 1 of 1

97 Forester HP/Torque Specs

Posted: Sun Jul 11, 2010 2:41 am
by kimokalihi
Anybody know what the HP and Torque numbers are for the 97 JDM Forester with 2.0 DOHC Turbo engine? I looked it up on google and wikipedia came up but they only list the specs of the 2.5 engine.

I also found this thread which suggests 215 PS or 212 HP but doesn't mention Torque.

http://www.subaruforester.org/vbulletin ... ade-59544/

How much HP/TQ do you think I will gain with TD05-16g, STI 565cc injectors, 06 TMIC, 3" TBE and Rob Tuned EJ20G ECU running 17-19 PSI?

Re: 97 Forester HP/Torque Specs

Posted: Sun Jul 11, 2010 4:24 am
by dscoobydoo
I would suspect that a conservative value would be what the EJ20G WRX numbers would be, as you are running the same size engine, turbo and top mount. plus about 10 for the tune.

Re: 97 Forester HP/Torque Specs

Posted: Sun Jul 11, 2010 6:54 am
by kimokalihi
I'm not running the same size turbo though. It's a TD04 stock. I'm also not running the same size injectors.

It's gotta be a lot more than 10 over stock with this setup.

Re: 97 Forester HP/Torque Specs

Posted: Sun Jul 11, 2010 7:35 am
by PhyrraM
Depending on the cams they put in the Forester, there is no reason not to expect close to the same numbers as Rob and others with 'real' EJ20Gs.

~280-300 crank HP and 250ish wheel HP is reasonable to expect. Likely higher.

Re: 97 Forester HP/Torque Specs

Posted: Sun Jul 11, 2010 8:09 am
by kimokalihi
That's about what I was hoping for. Sweet. But it would be cool to know the stock numbers too.

Re: 97 Forester HP/Torque Specs

Posted: Mon Jul 12, 2010 4:34 am
by dscoobydoo
I don't know if we have ever seen the stock numbers posted, as they are always for the WRX or STI.

Re: 97 Forester HP/Torque Specs

Posted: Mon Jul 12, 2010 7:11 am
by kimokalihi
Yeah I'm not finding anything on google.

Re: 97 Forester HP/Torque Specs

Posted: Mon Jul 12, 2010 9:26 pm
by wtdash
Since my other project involves a Forester, I'll put in my .02.

From the EJ-series Wikipedia LINK (under the EJ20G listing) it shows the '97-98 JDM Forester as 250 PS (PS is roughly equal to HP). I have a chart I downloaded from HERE, that uses 240 PS for the WRX (autos only?) and 280 for the STi versions.

I 'think' the '97-98 Foresters rec'd only the TD04 and 440cc injectors- same as lower WRX rating; the WRX STi had the 480cc and the TD05-16G.

HERE is another cool WRX/STi history LINK.

FYI: True or not?? The numbers from JDM cars are higher due to better/higher-octane fuel, from what I've read online.
Td

Re: 97 Forester HP/Torque Specs

Posted: Tue Jul 13, 2010 12:40 am
by yazmo
hey is this the same engine your talking about
what can be done with this this is local for me! look super clean

http://montreal.kijiji.ca/c-cars-vehicl ... Z215828477

Re: 97 Forester HP/Torque Specs

Posted: Tue Jul 13, 2010 1:23 am
by wtdash
yazmo wrote:hey is this the same engine your talking about
what can be done with this this is local for me! look super clean

http://montreal.kijiji.ca/c-cars-vehicl ... Z215828477
Nope..that's the NON-turbo 2.5 version.

Re: 97 Forester HP/Torque Specs

Posted: Tue Jul 13, 2010 1:54 am
by kimokalihi
Thanks wtdash. I don't think wikipedia is too reliable.
These engines were automatic transmission only in Japan
This statement is obviously false as my forester motor came with a manual trans.