Page 1 of 1
JDM Nardi wheel
Posted: Wed Aug 18, 2010 10:39 pm
by joshw02
This is a 360mm jdm nardi wheel. Excellent condition. $145 shipped.
http://s286.photobucket.com/albums/ll94 ... n02/nardi/
Re: JDM Nardi wheel
Posted: Wed Aug 25, 2010 7:25 am
by crashnburn
where are you located?
Re: JDM Nardi wheel
Posted: Wed Aug 25, 2010 2:09 pm
by joshw02
colorado
Re: JDM Nardi wheel
Posted: Sun Sep 12, 2010 5:45 am
by joshw02
bump
Re: JDM Nardi wheel
Posted: Sun Sep 26, 2010 4:47 am
by joshw02
again
Re: JDM Nardi wheel
Posted: Mon Sep 27, 2010 5:50 am
by 91legacyawdturbo
Darnit why can't I have extra money!!
Re: JDM Nardi wheel
Posted: Tue Oct 12, 2010 6:55 am
by joshw02
Bump $125 shipped firm.
Re: JDM Nardi wheel
Posted: Wed Oct 27, 2010 6:49 pm
by beanis05
does this bolt right in without a hub
Re: JDM Nardi wheel
Posted: Sat Oct 30, 2010 3:00 am
by SILINC3R
it should have a hub on the back of it. if it doesnt dont get it or it will not work. i bought one not knowing it didnt have the back piece and now im stuck with a 130 dollar nardi that i cant use. joshw02 did not sell me the wheel i am reffering to btw.
Re: JDM Nardi wheel
Posted: Sat Oct 30, 2010 3:58 am
by evolutionmovement
Couldn't you adapt a hub from a Grant or something to work?
Re: JDM Nardi wheel
Posted: Sat Oct 30, 2010 5:50 am
by SILINC3R
most of those have allen screws on the wheel and that is where you connect to the short hub or quick release hub which then connects to the sterring column. mine came without the splined hub that it should have had stock but it was taken off for some REASON and sold like that.
Re: JDM Nardi wheel
Posted: Thu Dec 02, 2010 5:52 am
by joshw02
Yes you need a hub adapter for this wheel. You can find them on ebay for about $50 new price on wheel is $100. So for around $150 you can have a sweet jdm nardi wheel.