FS: Patch harness, ej20g ecu
Posted: Sat Sep 18, 2010 12:25 am
Hey guys. I've got a couple things I wouldn't mind parting with. First is an ecu patch harness:
I made this out of a spare ecu and j/y connectors. I added wires, so every pin is accounted for. The soldered end is epoxy'd and very strong, so no need to worry about the connections coming loose. I have tested it and it works just fine. I'm thinking $50 bucks.
SOLD
The second is an ej20g ecu out of an early Liberty/Legacy RS.
It's code is B3, not to be confused with 3B which is a 16 bit wrx ecu (made this mistake.) This is an 8 bit ecu and is NOT chipable. It is a decent ecu if you want to run 440cc injectors, a Jecs maf, and turn up the boost a bit. If you do some research you can find how to make this work. I switched out the back plate so it mounts in our factory location. $40.00
SOLD
I made this out of a spare ecu and j/y connectors. I added wires, so every pin is accounted for. The soldered end is epoxy'd and very strong, so no need to worry about the connections coming loose. I have tested it and it works just fine. I'm thinking $50 bucks.
SOLD
The second is an ej20g ecu out of an early Liberty/Legacy RS.
It's code is B3, not to be confused with 3B which is a 16 bit wrx ecu (made this mistake.) This is an 8 bit ecu and is NOT chipable. It is a decent ecu if you want to run 440cc injectors, a Jecs maf, and turn up the boost a bit. If you do some research you can find how to make this work. I switched out the back plate so it mounts in our factory location. $40.00
SOLD