legacycentral bbs

This is my 93 SS.
It has a JDM version 3 RA/STi swap.
VF23 Ball bearing turbo
JDM RA/STi tranny with DCCD 4.44 gears.
4.44 LSD rear end.
2008 STi oil pump
MRT TMIC
ROB tuned EJ20G ECU
Custom CNC machined throttle body spacer
WRX axles
WRX Brake calipers and Reactive pads
Hallman MBC,
SARD BOV
2003 Wrx wheels.
Invidia 3" catless bellmouth downpipe
3" catless exhaust w/ magnaflow muffler
STi Hood scoop
STi struts and springs
K&N cone filter
HKS Fuel cut defender
255lph DW fuel pump
Lots of JDM decals
Pink six star badge it the front
Recaro Sport front bucket seats
STi Rear seat
and more stuff im forgetting

Bought and not installed: 550 Side feed STi injectors, Silicone turbo inlet, MRT top mount, SARD BOV




The day I got her. Already had a EJ20G swap in it. I paid 600 for it. The guy I bought it from couldnt get to start. I put a fuel pump and fuel filter in it and it fired right up.











New 00/01 RS wheels and tires




Some porn














New Halman Pro MBC and HKS FCD


MBC installed


3M Headlight restore kit half done


New STi axle back


JDM Door decals


Out gettin dirty


Oh Shiz, the 20G is gone and the flat black paint fairy came in my engine bay.


It has arrived! Behold its JDM glory!




VF23 Ball bearing turbo


Took the manifold off to repaint





Used red caliper paint.



Swappin parts



Stage 3 F1 ceramic 6 puck clutch




Done....





Cleaned up the TMIC fins with a pic tool and painted


Used filler neck tubing to custom make a Y-pipe to fit my TMIC stock was too short. This is before I cut to fit. Super PIPE!



Stock



RA!!!!!


New HKS SSQV4




Blacked out the center garnish


New 03 WRX wheels with Brand new Toyo Proxes




Most recent mod. Fishing lure air freshener

Good to see you have your priorities straight!

2000/01 RS Wheels! Gunna clean 'em up, puttires on 'em and go time!
Oh yea and a new STi sticker

Bought some 205/55/16's today and installed my new RS wheels!

Installed fogs today and painted my grill.



This is the stock mounting plate that held the plastic in. I used it to mount my lights.


I mounted the lights using the holes in the middle, now there was only one screw that would hold this on and it was floppy. SOOOO.... I took 2 5mm nuts and threaded them onto the 2 plastic nubs at the top of the fog hole. If anyone else does this dont tighten them down to hard or they will strip out.

ALL DONE!





The grill looks sweet too. This process took 2 hours inclulding all the wiring.
The light are neat, they have a Blue halo ring on the outside that I hooked up to the turn signals. The halo flashes too when I make a turn. Of course I used a relay and fusable link also.

hmm good idea with the turn signals

I bought the 20 dollar 3M headlight rest. kit at napa today. The kit was easy to use and simple. It attached to my drill. My lights were nasty yellow before this too. While I had the hood open I re-sprayed my TMIC and then finally took pics of the new exhaust.

I did the left first and compared

GOt my new stickers. got some for sale too.

looking good !!!

Ordered my Greddy FCD, Hallman boost control, and some longer wires to fit my modded coilpack!

Found some pics today. My old Brat that I built and my CRX that ran in the high 9's.



Built the moon JDM B17 with a JDM b16 cable tranny, LSD, skunk 2 intake. 66 trim snail on a custom stainless exhaust, small 4 core radiator, too much crap to list. And made custom traction bars for the front can see it in the engine bay pic.

looks like dollops of fun my man! this summer i'm planning to boost a b18b LS that my friend owns.. will probably use an ebay kit and a chipped ecu with crome, but options are open at this time.. he sourced a T04e .60 for 400$ but i think that's far too much.. know of a few people that have good experiences now with the chinese turbos so i figure we'd give one of those kits a shot, and the other hitch is I think the to4e is too big for trying to make 250whp max on the b18.. suggestions otherwise??

i like. those look like blm roads in eastern oregon

Got my new engine ordered.

Almost done

updated pics and mods

The Brat above is really cool!

what kind of horsepower u get with that setup on ur ss

How do you like the transmission? That is the exact same one I am thinking of getting for my rally car. Except I would have a DCCDPro aftermarket controller for the center diff.

keithmoilanen wrote:what kind of horsepower u get with that setup on ur ss

Right now were estimating 300 wheel horse. I have a chipped and tuned custom ECU. I already raced a 05 STi that wasnt stock and beat em. Ill post final numbers when I get my next tune.

MConte05 wrote:How do you like the transmission? That is the exact same one I am thinking of getting for my rally car. Except I would have a DCCDPro aftermarket controller for the center diff.

I love this transmission. Runs a little high on the highway but the 4.44 is awesome. super quick out of turns. I havent got my DCCD hooked up yet, theres a guy here in Bend thats a electical genius that made a controller for DCCD. Has one on his car and says it works great. Only 100 bucks so I might go with that.

i dont know if i missed it in the reading but what motor did u use. Year,....

All the mods are at the top of this thread. It's a MY98 JDM version 3 RA/Sti swap. Factory they are 320 bhp per an unspoken gentlemans agreement. If you want I can link ya the specs and info on it.

Hmm, are u satisfied with this set up?

So far yes. Its got way more HP now and I am almost where I want the engine power to be at for a daily. Gunna do bigger injectors and rails then Im done with upgrading the engine. move on to cosmetic and suspension. Plus when I open the hood peoples reactions are great when they see the swap.