legacycentral bbs

I am new to the old subaru stuff but I am now doing a project with a 91 na auto fwd car that I want to modify to around 300 hp I have done alot of research and maybe I am just looking in the wrong places but all I can find is how to upgrade the the 2.2t car I need info on what is needed to swap in an ej20 new or old can someone point me in the dirrection of what is needed and where to start?

Thanks

Andy

If you're looking for a "cut yellow wire and splice that to the green wire" type guide then I don't think there is one. HOWEVER, there is a lot of good info on this site, and a pretty good crowd. I'd recommend doing a bit of searching in the electrical, transmission (as your FWD tranny might not be around for too long) and engine sections.


But first of all, there is some general info here:

http://bbs.legacycentral.org/viewtopic.php?f=5&t=45030

This is another site, but they have an enormous knowlege base and days worth of reading on this page alone (about conversions):

http://forums.nasioc.com/forums/showthread.php?t=386462

Oh, welcome to the site!
-Mike