Page 1 of 1
91 Legacy TBE vs. 02+ Exhaust
Posted: Thu Jan 20, 2011 7:40 pm
by darkcrave
Does anyone have a side by side comparison? or measurements? what i would have to cut?
on the 91 vs. 02-07
1000$ exhaust system i don't really want to cut to much or weld more then i have to! hahaha
Pictures would be great!
Re: 91 Legacy TBE vs. 02+ Exhaust
Posted: Fri Jan 21, 2011 6:14 pm
by Legacy777
Check out this post by me
http://www.bbs.legacycentral.org/viewto ... 63#p349163
It has a link to what had to be done to fit the Impreza axle back section onto a Legacy. The mid-pipe just needs to be extended a few inches. It should be pretty straight forward. The axle back is the more complicated section.
Re: 91 Legacy TBE vs. 02+ Exhaust
Posted: Fri Jan 21, 2011 6:52 pm
by darkcrave
So basically the downpipe is the same, just needs to be extended from the axleback to muffler?
Re: 91 Legacy TBE vs. 02+ Exhaust
Posted: Fri Jan 21, 2011 6:56 pm
by Legacy777
The mid pipe and axle back need to be extended and the muffler hangers need to be tweaked on the one side..
Re: 91 Legacy TBE vs. 02+ Exhaust
Posted: Fri Jan 21, 2011 7:10 pm
by darkcrave
Last question i sear, will the aftermarket down pipe ( say cobb ) bolt up to the stock exhaust?
Re: 91 Legacy TBE vs. 02+ Exhaust
Posted: Fri Jan 28, 2011 6:57 pm
by Legacy777
I believe it should.
However, I can't say if Cobb alters there DP length at all. If it's setup for stock length and position and the stock WRX stuff works, then the cobb stuff should work.