ECU pin layout
Posted: Mon Feb 21, 2011 6:06 pm
I was wondering if anyone out there has the lay out for the pin configuration for the ecu for the 91 turbo legacy and the na version. I was also wondering if the pin layout on the 92 turbo changed at all. the reason i asked is because i was checking the resistance on the on the wiring from the ecu to the crank,cam and so on and when i check the crank the positive wire was running into pin 1 on conector C and the negitive was running to pin 2 on concector C i was comparing that to the 92 turbo wiring pin out put and i notice that pins 3 and 4 on C were the crank signal. So if any one might have those pin outputs so i can use it for referance so i can see if its right or not.