legacycentral bbs

Have an extra set of 96 WRX ej20g heads. They're in good shape, came from a running car, etc.
These are the style that are roughly equivalent to the USDM N/A 1996 EJ25D, so you can go to any parts store and get 96 EJ25D valve cover gaskets for it. Comes assembled, I made sure to not disturb the buckets or anything.
You can actually order the head gasket from a US dealer - it's part# 11044AA355 (need 2) - different thickness than the USDM EJ205 one.
$300 shipped to anywhere in the US, $250 picked up.

(note - left the HG's on in the pic. They are OEM and look original)


Also have a good set of EJ22T heads. $80 shipped to the states. (not pictured)

Also have a completely bare EJ25D intake manifold, $75 shipped. (not pictured either)


Thanks for looking,
Mike

pm sent

Added Pics

Bumpski

any idea what the combustion chamber size is on those heads? may help get them sold!

MikeyMeyagi wrote:any idea what the combustion chamber size is on those heads? may help get them sold!

Hadn't thought about it from that angle. These are the last of the ej20g WRX ones, so 47cc.

Would you be interested in selling just the throttle body? I'm running 20h heads and already have my intake manifold ceramic coated but would like a proper throttle body.

If you don't want to seperate them, that's understandable. But thought I'd ask just in case you were and the price was reasonable.

Thanks,

Lee

Hi Lee, at this point I want to keep the manifold together.

The 20k intake manifold is pending sale.

Intake Sold!

Bump it

bumpksi

Bump1