Page 1 of 1

Doubts about VIN code

Posted: Thu Apr 28, 2011 6:36 pm
by TheFlat4
Hi! My name is Luis Ignacio from Chile. I've been registered from a long time (presentation done) but now i have a really kind of "urgent" question for a friend.

His '90 Legacy was stolen about 3 years ago and now is a monument of dust and plants in the "parking lot" (i don't now how do you say it) of the police department . The things is he finally wants (and have the money)to recuperate his loved BC5 but the assholes who stolen erased all the "visible" VIN numbers.

Do you know a hidden VIN location on the BC5? The engine and "pillar" between windows are checked and no signs.

Before:

Image

Image

And now :( :(

Image


Thanks!

If you would like send an PM, i have no problems...

legacychile.cl

Re: Doubts about VIN code

Posted: Thu Apr 28, 2011 9:39 pm
by evolutionmovement
The firewall, dash, and build placard on the door pillar are the only places I know of. Too late for your friend, but you can also have the VIN etched into the glass as a security measure.

That was a beautiful Legacy. I hate thieves.

Re: Doubts about VIN code

Posted: Thu Apr 28, 2011 11:33 pm
by TheFlat4
Thanks evolutionmovement :wink:

Does anyone else have another option¿?

Re: Doubts about VIN code

Posted: Fri Apr 29, 2011 2:40 am
by Legacy777
There's also a placard on the strut tower in the front, but I would assume they probably got that as well.

Re: Doubts about VIN code

Posted: Mon May 09, 2011 12:49 am
by Ahzlon
Idk if this was just on my 00 RS. But, check the rear deck lid underneath right side and on the left or right side strut behind all the padding/interior junk. My RS had them there too. Not sure if it was aftermarket stamping but it was there too. Also check out NASIOC.com another great resource for information on our cars. Someone might have another place that is hard to get to that might have the VIN emblazed on the car. Good Luck.

Re: Doubts about VIN code

Posted: Mon May 09, 2011 6:07 pm
by BSOD2600
Per the FSM...

Image

Re: Doubts about VIN code

Posted: Mon May 09, 2011 11:54 pm
by TurnNburn
The one in the engine bay on the fire wall is stamped into the metal and cant just be pealed off. But if they were real jerks... well considering they already did this they already deserve a punch in the throat... but they would really have to grind the crap out of that VIN to get it to go away as it is stamped in there pretty good.

Re: Doubts about VIN code

Posted: Sat Jul 30, 2011 6:18 pm
by TheFlat4
Many thanks to everyone. I'll keep you updated... now it's winter in Chile and the poor Legacy has been under extreme conditions :(