Page 1 of 1

JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Thu May 12, 2011 5:25 am
by supraglen
***SOLD***
I have a few things left over from an EJ20H that I need to get rid of. They are just taking up space, but I figure somebody may want them, so everything is best offer. Here's how it's gonna work, to make it worth my time I want to end up with $100, so for $100 you can have as much of this stuff as you want to pay shipping for. If you want to offer less than $100 for something be specific and once I get offers that add up to $100+ship I'll split it up. Send all offers via PM.

I have both fully dressed heads, I think I remember hearing some leaking valves when I did a leakdown test after I first got the engine, the cams, valvecovers, and single bolt coils are also there, but not shown in the pictures
Image
Image

Here are the camgears and timing covers (the cover on the bottem left of the picture is slightly broken at the top)
Image

And a crank timing gear and the water neck
Image

Intake, with wiring harness and gray sidefeed injectors / rails (380cc, I think?)
Image

The alternator
Image

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 5:36 am
by supraglen
Oh I also have the 5-speed trans that came with this engine, if anyone can use that, that's outside the $100 deal though and of course shipping transmissions sucks. The code is 85-TY752VBAAA, make an offer.

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 6:34 am
by kimokalihi
I sent you a PM!

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 8:49 am
by x2hawt4ux
where r u located

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 3:37 pm
by cj91legss
Yeah, location would be awesome, you should update your location in the User Control Panel

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 5:44 pm
by supraglen
Oops, sorry, Minneapolis MN

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 6:08 pm
by IronMonkeyL255
How much for shipping the heads/gears and the manifold?

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Thu May 12, 2011 10:59 pm
by kimokalihi
Did you get my pm?

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC

Posted: Fri May 13, 2011 1:08 am
by supraglen
Yes I did, sorry, I just didn't have time to call during the day

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Fri May 13, 2011 4:37 am
by supraglen
MAF sold to kimokalihi, still looking for $100 total for the rest, I will try to weigh the stuff tomorrow so I can do shipping estimates.

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Fri May 13, 2011 7:42 am
by IronMonkeyL255
Oh, and my zip is 29651. Might help if you needed to know where shipping was to.....

Edit: If all the rest is available I will most likely take it all. The new motor needs good heads something bad.....

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Tue May 17, 2011 8:04 am
by IronMonkeyL255
Don't suppose you've had a chance to check on this yet?

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Wed May 18, 2011 6:05 am
by supraglen
Sorry guys I'm way busy getting the racecar ready for a test day next week. I will try to weigh the parts tomorrow.

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Wed May 18, 2011 8:26 am
by IronMonkeyL255
It's all good. Gonna be a bit before I can get around to building the new motor anyways.

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Thu May 19, 2011 5:32 am
by supraglen
According to my crappy bathroom scale...

Heads are a little over 30# each
cam gears and covers 10#
intake is 20#
alternator is 10#

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Thu May 19, 2011 5:39 am
by supraglen
IronMonkeyL255 wrote:Oh, and my zip is 29651. Might help if you needed to know where shipping was to.....

Edit: If all the rest is available I will most likely take it all. The new motor needs good heads something bad.....
USPS max weight is 70#, I can get both heads in one shipment, but nothing else, that would be $42. To get the rest would be a second package at ~40#, which would be another $26. So for ~$168 you can have it all, sounds like a bargain.

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Thu May 19, 2011 5:30 pm
by supraglen
SOLD

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Wed May 25, 2011 8:18 pm
by kimokalihi
I received the airbox the other day, thanks! Looks like it should work perfectly...as soon as I get a new silicone hose for it.

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Tue Aug 30, 2011 1:47 am
by 07Evolved
everything sold?

Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.

Posted: Tue Aug 30, 2011 2:55 pm
by supraglen
Yup, long gone