legacycentral bbs

I'm finally getting around to taking apart my old EJ22T, so I have some parts to sell. The engine only had 3k on it after being resealed and somewhere around 175k total. It was running perfectly. All day long, 4 days straight, including a couple mountain passes, the day after I dropped it back into the car.

Not selling the block.

--Stock pink sidefeed fuel injectors and rails - $25. --sold--
On 3 injectors I broke off the little nub that the connector snaps onto. I was being careful too . The connectors stick onto the injectors so tightly I still wouldn't be worried about them coming off. I don't feel like messing with the crusty old phillips head bolts, so the rail, injectors, and FPR are a package deal lol.

--Intake elbow, turbo <-> resonator, $10 --sold--

--VF11 turbo - $25 --sold--

--Heads + valve covers - $25
One exhaust manifold stud came out with the nut. One intake manifold bolt snapped.

--Intake manifold - $10 , no TB or IACV

--Coolant reservoir -$10 ,
One of the nipples cracked off and I threaded in a brass fitting in its place and put some JB weld on to seal it. Always planned on replacing it, but it ran like that for 3 years without a problem.

--Canister purge solenoid -$15
Bought new 4 years ago, 25k or so on it now

--Clutch master & slave cylinders & reservoir. $10

--Timing belt cover pieces, $5
Both passenger side sections and the front driver side section. The others are damaged.

--Charcoal canister $5

--Timing belt tension adjuster and tensioner pulley. --$50
New from Subaru June 2010. Used for ~2 weeks. Less than 3k miles on them. Close to $200 for both new. I'll toss in the mounting bracket too.

--STi up pipe $40
Off an 05 if i remember correctly.

--MAF sensor $20

--EJ22T rods $10 --sold--

--EJ22T pistons $10 --sold--

got any of the air intake parts?

Yep all of the intake parts are for sale, including the MAF sensor.

injectors sold.

Is the turbo in good shape? and do you still have the air intake parts?

I can feel just the tiniest bit of shaft play in the turbo. It was working great last time the engine ran, I wouldn't hesitate using it again if that's where my build was going.

I have all the intake parts, except for the one rubber elbow that connecters to the turbo inlet.

Added a few more parts. OBO, just want to see the parts go to a good home

pm'd you.

sell just the cams in the heads? price shipped to 95205
pictures on the timing belt pulleys?

Might have to see if a couple things are still around when I finally have dough. Have a buddy that used to be on here all the time that will be interested in a couple things as well, I'll let him know...

darkcrave wrote:sell just the cams in the heads? price shipped to 95205
pictures on the timing belt pulleys?

Nope.

Omega79 wrote:Might have to see if a couple things are still around when I finally have dough. Have a buddy that used to be on here all the time that will be interested in a couple things as well, I'll let him know...

Ok.

Ill pay the 25+ Shipping i just dont want to pay the shipping for the whole head when i only need the cams

bummmmp

Bump for timing tensioner goods

got the stock map/ turbo pressure sensor? part num 22012AA020
thanks,
dustin

It should be around somewhere, but I can't seem to find it.

intrested in purge sylonoid,and knock sensor, any auto trany? need front diff.........

interested in the heads, and the rods, and maybe the pistons...pm me please

Lots of stuff sold.

Practically new old style timing belt tensioner and pulley still available.