Page 1 of 1
intercooler to intake manifold
Posted: Sun Jul 31, 2011 11:32 pm
by Falken-18c
what type of hose do i need so i can clamp my intercooler to my intake manifold and where can i get it with out geting it online like a hardware store are ect thanks
Re: intercooler to intake manifold
Posted: Mon Aug 01, 2011 1:29 am
by Falken-18c
i just thought could i use a 3inch pipe and just seal it to the intake manifold and intercooler i dont see why not but any information will help
Re: intercooler to intake manifold
Posted: Mon Aug 01, 2011 1:48 am
by Legacy777
Measure the diameter, it's probably 3". You should be able to get a 3" silicone coupler at the autoparts store.
Re: intercooler to intake manifold
Posted: Mon Aug 01, 2011 2:22 am
by Falken-18c
yea hopefully. i went tonight at 6.30 and every thing was closed and i think nothing will be open tomorow because of some holiday that i dont know lol.. ok i asked my sister some civic holiday i guess i dont know atleast i get paid doing nothing lol. yea ill see what i can do tomorow and another thing just poped in my head should i wait til after i safety my car it shouldnt afect anything should it
intercooler to intake manifold
Posted: Mon Aug 01, 2011 3:06 am
by Grayguy
I've found that at NAPA you can buy like 3 feet chunks of semi intercooler piping stuff for way cheaper than silicon couplers, they are reinforced rubber.
Re: intercooler to intake manifold
Posted: Wed Sep 07, 2011 1:27 am
by Guttersmash
I work at autozone and we have 3 inch diameter silicone couplers for like $8. One of those would work fine.
Re: intercooler to intake manifold
Posted: Sun Sep 11, 2011 9:54 pm
by Falken-18c
ya i ended up buying one from subaru 30$ lol
Re: intercooler to intake manifold
Posted: Thu Sep 15, 2011 2:29 am
by super_usdm
The ID of the coupler is 2.75", not 3".