Page 1 of 1
WTB: 90 degree elbow between resonatior and turbo
Posted: Sat Aug 13, 2011 6:21 pm
by Smoothinto2nd
As the title says. I need the elbow between the turbo and the resonator for my touring wagon.
Do you have one?
TAMR4449@aol.com, pm or text, 860 670 4832
Re: WTB: 90 degree elbow between resonatior and turbo
Posted: Sun Aug 14, 2011 2:06 pm
by Smoothinto2nd
oh ya this is for my DD so if anyone has it they'd really be helping me out.
Re: WTB: 90 degree elbow between resonatior and turbo
Posted: Sun Aug 14, 2011 5:03 pm
by cj91legss
i have one that has a crack on one of the smaller nipples. It can be epoxied fairly easy if you want it, 25 shipped?
Re: WTB: 90 degree elbow between resonatior and turbo
Posted: Sun Aug 14, 2011 8:43 pm
by lucas
been there good luck finding one.
Re: WTB: 90 degree elbow between resonatior and turbo
Posted: Mon Aug 15, 2011 1:53 pm
by Smoothinto2nd
Just found an old hard one at a local junk yard for $40
I'll see if it stays together first.
Re: WTB: 90 degree elbow between resonatior and turbo
Posted: Wed Aug 17, 2011 12:20 am
by wtdash
Hi,
You'll want one of these new, p/n: 46023AA110 - called a 'boot' - about $75:
The new ones are very soft. MAKE SURE you don't put any side-to-side or other pressure on them as they'll tear right @ the top of the turbo inlet on the hose clamp....esp. if you have a custom intake w/the coffe cup mod or similar.
GL,
Td
Re: WTB: 90 degree elbow between resonatior and turbo
Posted: Wed Aug 17, 2011 3:08 am
by darkcrave
thats not bad at all!