FS: 1991 Legacy Racing shell (light weight)
Posted: Mon Nov 21, 2011 3:40 am
I’m selling my 1991 Subaru Legacy racing Shell. (extra light)
This is a project to be completed. Fully custom.
Bare shell only. Unpainted. No drivetrain, no electrical wiring, no suspension included.
No roof skin or hood.
***Some body parts (glass (not all) and doors (not all)) can be included in sale,
but a donor car would be your best option.
-Completely seem welded body
-All useless brackets removed
-All useless double skin removed
-All seem sealant and gravel guard scrapped
-All holes and floor plugs welded
-Full rollcage (2004 specs) installed and welded to body
-Racing seat mounts welded to body
-Reinforced shock towers + tied to rollcage
-Shock tower brace welded to fire wall
-Fire wall pedal box mount (for wilwood type)
-Rocker panel (sill) jack stands points
-Custom rear diff solid mounted to body (fuelcell must be used if this option is taken)
…
Hundreds and hundreds of hours already spent on shell prep. (the worst is done )
To be completed to your desires.
No titles
Please contact me via email, not by tread reply:
Jnboucher (at) yahoo.ca
Located in Montreal region, Canada
1500$
Pictures here
http://public.fotki.com/PRT/legacy-shell/
***To be determined after I do an inventory check of what’s left. No promise.
Reason for selling if you really need to know, change of direction in the project;
Too many major changes to the shell to meet the new project goal.
JUST TO BE CLEAR, THIS IS A SHELL ONLY
This is a project to be completed. Fully custom.
Bare shell only. Unpainted. No drivetrain, no electrical wiring, no suspension included.
No roof skin or hood.
***Some body parts (glass (not all) and doors (not all)) can be included in sale,
but a donor car would be your best option.
-Completely seem welded body
-All useless brackets removed
-All useless double skin removed
-All seem sealant and gravel guard scrapped
-All holes and floor plugs welded
-Full rollcage (2004 specs) installed and welded to body
-Racing seat mounts welded to body
-Reinforced shock towers + tied to rollcage
-Shock tower brace welded to fire wall
-Fire wall pedal box mount (for wilwood type)
-Rocker panel (sill) jack stands points
-Custom rear diff solid mounted to body (fuelcell must be used if this option is taken)
…
Hundreds and hundreds of hours already spent on shell prep. (the worst is done )
To be completed to your desires.
No titles
Please contact me via email, not by tread reply:
Jnboucher (at) yahoo.ca
Located in Montreal region, Canada
1500$
Pictures here
http://public.fotki.com/PRT/legacy-shell/
***To be determined after I do an inventory check of what’s left. No promise.
Reason for selling if you really need to know, change of direction in the project;
Too many major changes to the shell to meet the new project goal.
JUST TO BE CLEAR, THIS IS A SHELL ONLY