Page 1 of 1
Ej22t swap
Posted: Fri Nov 25, 2011 11:04 am
by Joshsmiley55
Hey I have a 95impreza L awd coupe witch comes stock with an 1,8l ..so im dropping in a ej22t furst gen rebuilt engine and i was wondering if all i need is just replace the ecu rather then the whole wire harness. Thanks
Re: Ej22t swap
Posted: Fri Nov 25, 2011 12:09 pm
by kimokalihi
I'm thinking probably the entire harness but you might be able to get away with less. I know with NA legacys you add a few pins and wires and the EJ22T ECU and be good to go. Of course, you'll need the factory boost control solenoid and MAP sensor.
Re: Ej22t swap
Posted: Sat Nov 26, 2011 1:12 am
by Rubasu
is ur 95 a obd 1 or obd 2? obd1 u can just swap and add a few wires. and the ecu
Re: Ej22t swap
Posted: Mon Nov 28, 2011 12:05 am
by Legacy777
What does the ECU plugs look like? If the plugs are the same as the EJ22t ECU, I'd just move pins around to make things work, vs rewiring the harness. The engine plugs will be different, so you'll have to deal with that.