Page 1 of 1
4eat transfer valve advise?
Posted: Tue Dec 06, 2011 1:40 am
by criticalm@ss
I called 2 dealers to order my duty c solenoid and they are clueless.
He gave me a part number similar to this one
31942AA090 VALVE AY TRANSFER CLUTCH 112.94 (DUTY C SOLENOID)
for a 1992 legacy L a/t n/a.
discrepancies in terminology.
And they werent sure if they come seperate from the valve or if I have to buy it as an assy????
Re: oh my gosh help!
Posted: Tue Dec 06, 2011 6:43 am
by criticalm@ss
bump
Re: oh my gosh help!
Posted: Tue Dec 06, 2011 7:45 pm
by Legacy777
From what I can tell, around the 92 MY they changed the sensor from being a plug in type sensor to being part of the harness. Or at least that's what I believe.
Give me your VIN # and I'll let you know what you need.
Re: oh my gosh help!
Posted: Tue Dec 06, 2011 11:06 pm
by wtdash
Hi,
I R&R'd the the hub on the rear of my '91 4EAT and here is a parts list:
> >31942AA090 Valve Ay. transfer clutch (This is the one for a majority of vehicles, some early models took a different part #.) The early part number may be: 31942AA061 (see below)
> > 31954AA071 (QTY=2) Gasket for solenoid and plate.
> > 31337AA120 Extension housing gasket
> > 11126AA000 Drain plug gasket for tranny
This
LINK on opposedforces.com shows the rear housing and #13 is the Duty C. The early p/n shown is: 31942AA061
And if I understand the question that dealer has......Subaru did put the Duty C in the valve body for awhile, then moved it back to the rear transfer case housing like on my '91....I just discovered this doing research on my '04 FXT.
GL,
Td
Re: oh my gosh help!
Posted: Tue Dec 06, 2011 11:34 pm
by criticalm@ss
vin
they have
31942aa031
Re: 4eat transfer valve id problem.
Posted: Wed Dec 07, 2011 2:59 am
by criticalm@ss
looks like i buy the whole assy.
Re: 4eat transfer valve id problem.
Posted: Wed Dec 07, 2011 10:35 am
by criticalm@ss
Can someone tell me for sure if mmy wagon is a 91 or a 92??
Door sticker im gona have to check.
Re: 4eat transfer valve id problem.
Posted: Wed Dec 07, 2011 4:14 pm
by vrg3
That VIN is for a 92 -- the "N" in the tenth digit means 1992 model year.
Re: 4eat transfer valve id problem.
Posted: Wed Dec 07, 2011 7:03 pm
by criticalm@ss
Cool thanks so much, I have some strut question in the suspension thread
needing attention.
Re: 4eat transfer valve id problem.
Posted: Wed Dec 07, 2011 7:26 pm
by Legacy777
Pulled your VIN up in the electronic parts book, and based upon the build date of July of 91, you need this part # for the duty c solenoid, 31942AA070.
I'm going to email you a pic from the parts book that shows the decoding of your VIN.
Re: 4eat transfer valve id problem.
Posted: Thu Dec 08, 2011 1:44 am
by criticalm@ss
you sir are my hero, it pays to be helpfull finally i am getting some love back.
Re: 4eat transfer valve id problem. resolved but!
Posted: Sat Dec 10, 2011 8:27 am
by criticalm@ss
Ok so part number figured out, now I am also going to order clutch plates but I am
very nervous about doing this.
I have done timing belts on sohc, and other various stuff but never an automatic.
I have done a clutch before but some reason I am scared to do this ....and I saw a good write up, i will link it here for my easy ref.
If anyone has any input please post up.
Thinking about trying to find same or similar trany at the junkyard
to take apart for learning experience or am I being paranoid?
I know about not pinching the wire.
http://www.subaruoutback.org/forums/99- ... ssion.html