legacycentral bbs

it is a front drive, 2.2 n/a
car is a 5 spd, white, and blue interior, let me know what you need

will only last two weeks or so, just to let you know

I need the outside black rear triangle trim pieces that go around the C-D pillar window,
BUT I WANT THEM WITH THE SCREW IN THE TOP CORNER INTACT.
( most people forget about this and break it- as you have to get at it from inside)

kthxs

ok, i will get them. they are in usable good shape.
how bout 20.00 plus shipping

ok guys, the car needs to go soon, speak up before i smoosh it

Where are you lol?

montana

Will your Pass fender, corner light, and head light fit on a 93 wagon

If so lemme know what you will take to get rid of them,

thanx

they are a different body style

crawlerdan wrote:they are a different body style

good to know thnx

Im looking for a 2.2 n/a engine for my 93 wagon ls 4wd auto.. Thanks Tom

i have a good one, ran strong, normal valver cover leakes, used no oil, got great mpgs till the day i pulled it, its out of a 91, so a direct swap into yours, comes with all sensors and intake, ect. im asking 500
make an offer and ill ship it to you ups or something

how many miles on it , last timining belt/w-pump maintenance-idlers-etc - Thanks

car has 193k, motor was replaced at 15x,xxx with a low mile jdm motor with 30-50 k
timing belt, pumps and idlers replaced at that time, as well as clutch
so we can assume the set up has 40-50, with less then 100k on total motor. it is a one owner car, i got it from long time customers after they hit and elk and imsurance totaled it

i would 1005 trust it with nothing more then a reseal. i will give you the same warranty a wrecking yard gives- 30 day money back no questions asked

thanks for reply...i thought i read a post on here that the 91 injectors are different than a 93 (do not flow as good?) and also possibly other parts/plug-ins on the intake ?, also , what type or re-seal are you referring to...just want to be sure..

i dont know about injectors- but i do know it wouldnt be enought to give a crap about
and it comes with the harness, that will plug and play in your car- so sensors dont matter either, the only one that could be different is the IAC. reseal meaning valve cover gaskets, exhaust, maybe cam seals, thats about it- 50 tops

dscoobydoo wrote:I need the outside black rear triangle trim pieces that go around the C-D pillar window,
BUT I WANT THEM WITH THE SCREW IN THE TOP CORNER INTACT.
( most people forget about this and break it- as you have to get at it from inside)

kthxs

Ha! I need them too. Broke mine. Actually just the driver side. Didn't know it was there and yanked it off and now it flaps in the wind.

crawlerdan wrote:i have a good one, ran strong, normal valver cover leakes, used no oil, got great mpgs till the day i pulled it, its out of a 91, so a direct swap into yours, comes with all sensors and intake, ect. im asking 500
make an offer and ill ship it to you ups or something

I'd give $400 with shipping included... Tom

and youll pay for shipping- or 400 total i cover shipping?

[quote="crawlerdan"]and youll pay for shipping- or 400 total i cover shipping?[/quote


$400 & you cover shipping...right mow thats all i can do...."tis the season"

well- if you can come up with a resonable shipping cost ill think about it

crawlerdan wrote:ok, i will get them. they are in usable good shape.
how bout 20.00 plus shipping

was not even worried about the price.
If intact, I send the money.

one had a damaged clip, and the PO fixed it with a dry wall screw

[quote="crawlerdan"]well- if you can come up with a resonable shipping cost ill think about it[/quote


wouldn't know where to start as I have never shipped out anything... figured you would be the expert on that.. I live in Camdenton MO 65020 but visit my parents in St.Louis MO 63123 frequently..If not I may try to rebuild the extra shortblock & heads I got when I bought the car..? Im inexperienced with Subaru mechanicals but have done the timing belt/w-pump changes.. ....anyway...Thanks & Happy Holidays
Cheers Tom

i think it would be a loosing indeavor on my part

I'm looking for a good condition passenger side tail light, rear "stars" oval badge, and the drivers side "legacy" badge on the C pillar. LMK if you have any of these items, thanks!

my email is keatinga@my.uwstout.edu