Page 1 of 1

Hesitation PLEASE HELP!!!!

Posted: Sun Mar 04, 2012 12:01 am
by x2hawt4ux
ok so here is a list of current mods to start that may have something to to with it. td04, fmic, bov(atmosphere), fcd, 3" tbe, w58(rwd), wrx fuel pump.


ok so the car runs fine driving down the road at a steady speed. when i accelerate say from a stop it will go fine for a second and then feel like i slammed on my breaks and it sounds like muffled backfire coming from the engine bay and then accelerate very fast with out changing pedal position up to the point that i either let of the gas or shift or put the clutch in something along those lines. it does it in every gear at every speed. i always run premium gas.

thanks guys

Re: Hesitation PLEASE HELP!!!!

Posted: Sun Mar 04, 2012 4:05 am
by jefferson
Sounds to me like a line is off the boost control solenoid. Happened to me once after some work. Boost control solenoid is on the passenger side strut tower.

Jeff

Re: Hesitation PLEASE HELP!!!!

Posted: Sun Mar 04, 2012 5:46 pm
by x2hawt4ux
ok ill check it out.

thanks

Re: Hesitation PLEASE HELP!!!!

Posted: Mon Mar 05, 2012 12:40 am
by x2hawt4ux
so its not that. anything else???

Re: Hesitation PLEASE HELP!!!!

Posted: Mon Mar 05, 2012 12:45 am
by Legacy777
Have you checked all the vacuum/boost hoses for leaks? Double check those. Also, I'd suggest checking the resistance of the wiring from the various sensors to the ECU connectors.

Re: Hesitation PLEASE HELP!!!!

Posted: Mon Mar 05, 2012 3:58 am
by x2hawt4ux
ill do that after work. thanks for the help

Re: Hesitation PLEASE HELP!!!!

Posted: Wed Mar 07, 2012 2:07 am
by x2hawt4ux
no leaks that i can see, although i did get a code for the maf now. does that make sense?

Re: Hesitation PLEASE HELP!!!!

Posted: Wed Mar 07, 2012 5:57 pm
by Legacy777
Check the resistance of the wiring from the ECU to the MAF sensor and check the MAF sensor to see how it compares to the FSM specs