Page 1 of 2

cleaning out my parts...

Posted: Tue Mar 27, 2012 7:31 pm
by Rubasu
So I am leaving for four or five months this summer, and decided to sell some of my parts. Most is for my 1st gen leggy but we all know subies are like legos, it all fits.

Ej257 con rods 52mm $75

04 STI springs $80

EJ22t parts.
Factory ej22t head gaskets $100
SOHC heads complete $100
x2 ver1 crank shafts (thrust #3) $75 each
No name up pipe with EWG flange and EWG(not working?) $50 any ej
complete exhaust manifold w/ cat less up pipe $100 any ej
Exhaust collectors w/cross pipe not bolted up $75 any ej
X2 oil pump $45 each any ej 2.2 or smaller
X2 turbo style water pump $45 each any ej
.020 over wiesco pistons 8.5 cr 6000 miles $200
X2 stock rods 52mm $50 each set
X3 intake manifolds bare $50 each
X2 throttle body's $20 each
X2 360cc injectors with rails $75 each set
Remote coolant res. $65
x2 oil pans w/ pick up and windage tray $35 each set any ej

also i have a 93 parts car with no engine but every thing else. i bought it then found out (seen) the fame is bent.

EVERY THING OBO! And willing to ship ant buyers expense only.

fastest way to get a hold of me would be txt. eight 0 one 819 93 95 Andrew

Re: cleaning out my parts...

Posted: Wed Mar 28, 2012 4:03 am
by beatersubi
More details on the pistons, please.

Re: cleaning out my parts...

Posted: Wed Mar 28, 2012 9:16 am
by subydaddy
Sun visors?

Re: cleaning out my parts...

Posted: Wed Mar 28, 2012 3:30 pm
by Rubasu
beatersubi wrote:More details on the pistons, please.
the pistons i used for my last build. drove it for about 6000 miles when my dampner came loose and effed up my crank. i lost my #5 main bearing and so i tore the motor down and just got a closed deck 20g to replace it. i woould keep them just dont have the time or money for a build right now. plus i sold my spare blocks.

Re: cleaning out my parts...

Posted: Wed Mar 28, 2012 3:31 pm
by Rubasu
subydaddy wrote:Sun visors?
yes out of my new parts car i do. i believe they are the stock ss color.

Re: cleaning out my parts...

Posted: Wed Mar 28, 2012 3:45 pm
by Rubasu
bump added head gaskets!

Re: cleaning out my parts...

Posted: Thu Mar 29, 2012 1:48 am
by beatersubi
Rubasu wrote:
beatersubi wrote:More details on the pistons, please.
the pistons i used for my last build. drove it for about 6000 miles when my dampner came loose and effed up my crank. i lost my #5 main bearing and so i tore the motor down and just got a closed deck 20g to replace it. i woould keep them just dont have the time or money for a build right now. plus i sold my spare blocks.
Compression height, bore, dish, cc, etc.? Or a part number, if you have it. Are they designed to be used with stock heads or 20G/25D?

Re: cleaning out my parts...

Posted: Thu Mar 29, 2012 8:20 am
by guesswho
Consider the ewg sold pending pics.

Re: cleaning out my parts...

Posted: Thu Mar 29, 2012 11:53 pm
by Omega79
What color interior of parts car? If black can you PM price of door cards shipped to 86406?

Re: cleaning out my parts...

Posted: Mon Apr 02, 2012 12:01 am
by Rubasu
the door cards are black but one of them needs to be re upolstered.


and ill get so pics of the EWG to you guesswho

Re: cleaning out my parts...

Posted: Tue Apr 03, 2012 12:32 am
by Rubasu
pistons.
Image
Image
comes with the rings

Ewg
Image
Image
Image
Image
it doesnt leak just doesnt look the best. and no i did not weld this.

Re: cleaning out my parts...

Posted: Thu Apr 05, 2012 3:54 am
by Rubasu
Bump! I'll be leaving soon and won't be able to sell anything till September.

Re: cleaning out my parts...

Posted: Thu Apr 05, 2012 3:54 am
by Rubasu
Bump! I'll be leaving soon and won't be able to sell anything till September.

Re: cleaning out my parts...

Posted: Thu Apr 05, 2012 5:23 am
by randomiam
I might be interested in a Oil & water pump. Are these used spares or new?

Re: cleaning out my parts...

Posted: Mon Apr 09, 2012 5:54 am
by Rubasu
used only. no new.

Re: cleaning out my parts...

Posted: Thu Apr 12, 2012 5:13 am
by Rubasu
bump!

Re: cleaning out my parts...

Posted: Thu Apr 12, 2012 5:23 am
by ciper
Do you have the ABS unit from the parts car? If its the Bosch style I am interested (not the Nippon, I already have a spare).

"X2 turbo style water pump $45 each any ej"
There are actually two types of turbo pump. One with two nipples for turbo cars which don't have an oil cooler and one with three nipples for turbo cars with an oil cooler. 91 Legacy turbo has the three nipple one, just like the 02+WRX. 92-94 Legacy turbo have the two nipple one like some models from other countries.

Re: cleaning out my parts...

Posted: Thu Apr 12, 2012 6:33 pm
by Rubasu
Ya sorry 1 two nipple and one three nipple water pump

Re: cleaning out my parts...

Posted: Sun Apr 15, 2012 10:59 pm
by Rubasu
Sorry I'm leaving. Ill bump this when I get back.

Re: cleaning out my parts...

Posted: Mon Apr 16, 2012 1:59 am
by oleman77
Rubasu wrote:So I am leaving for four or five months this summer, and decided to sell some of my parts. Most is for my 1st gen leggy but we all know subies are like legos, it all fits.

Ej257 con rods 52mm $75

04 STI springs $80

EJ22t parts.
Factory ej22t head gaskets $100
SOHC heads complete $100
x2 ver1 crank shafts (thrust #3) $75 each
No name up pipe with EWG flange and EWG(not working?) $50 any ej
complete exhaust manifold w/ cat less up pipe $100 any ej
Exhaust collectors w/cross pipe not bolted up $75 any ej
X2 oil pump $45 each any ej 2.2 or smaller
X2 turbo style water pump $45 each any ej
.020 over wiesco pistons 8.5 cr 6000 miles $200
X2 stock rods 52mm $50 each set
X3 intake manifolds bare $50 each
X2 throttle body's $20 each
X2 360cc injectors with rails $75 each set
Remote coolant res. $65
x2 oil pans w/ pick up and windage tray $35 each set any ej

also i have a 93 parts car with no engine but every thing else. i bought it then found out (seen) the fame is bent.

EVERY THING OBO! And willing to ship ant buyers expense only.

fastest way to get a hold of me would be txt. eight 0 one 819 93 95 Andrew
Do you have engine mounts for a 1994 EJ22T? I need both....pete

Re: cleaning out my parts...

Posted: Tue Apr 17, 2012 4:35 am
by Rubasu
Yes I have a few sets but won't have time to ship. I'm driving to indiana.

Re: cleaning out my parts...

Posted: Tue Apr 17, 2012 4:55 am
by oleman77
Rubasu wrote:Yes I have a few sets but won't have time to ship. I'm driving to indiana.
Ok no worries dude...travel safe...

Re: cleaning out my parts...

Posted: Thu Jun 14, 2012 5:45 am
by Rubasu
bump this stuff is for sell again!

Re: cleaning out my parts...

Posted: Tue Jun 19, 2012 5:44 pm
by Rubasu
bump!

Re: cleaning out my parts...

Posted: Wed Jun 20, 2012 5:14 am
by chashiubow
interested in your oil pan. How much with shipping to 94545? Condition?