Page 1 of 1
02 WRX 20mm front swaybar
Posted: Thu May 10, 2012 9:17 am
by Thesubielover
I'm aware that these fit a 93ss, but I was wondering if I can use my stock endlinks or which ones I should go with since they may need to be replaced any ways.
Re: 02 WRX 20mm front swaybar
Posted: Sun May 13, 2012 11:12 pm
by Legacy777
You should be able to use the stock end links. If anything you may just need to make the hole on the anti-sway bar a little bigger if needed.
Re: 02 WRX 20mm front swaybar
Posted: Mon May 14, 2012 10:29 pm
by jamal
the wrx sedan bar is wider. You want a wrx wagon specific bar.
the difference in the endlinks is the lower hole where it mounts to the control arm. narrow/wagon arms are different from WRX sedan arms. The WRX swaybar will attach to stock endlinks just fine. WRX endlinks will not attach to the stock control arms very well.