Page 1 of 1
WTB: connectors
Posted: Sun Jul 29, 2012 12:27 am
by SILINC3R
Here is what I need:
connector for the EDM tail lights
connector for the EDM leveling on the light side
connector for the EDM leveling switch
That is all I can think of the moment. Thanks in advance
Re: WTB: connectors
Posted: Sun Jul 29, 2012 6:12 pm
by HomeSlice
for the tails you can just re pin them thats what i did.
Re: WTB: connectors
Posted: Mon Jul 30, 2012 2:55 am
by SILINC3R
Any of you Euro Gents care to lend a hand, please.
Re: WTB: connectors
Posted: Mon Jul 30, 2012 11:21 am
by HomeSlice
you have pics of the connectors? maybe subaru used them somewhere else on a 90L i could cut for you. on the tails u can also use station wagon connectors as they have four more pins. or you can use the sedan and jus move all the pins over.
Re: WTB: connectors
Posted: Tue Jul 31, 2012 4:43 am
by dscoobydoo
SILINC3R wrote:Here is what I need:
connector for the EDM tail lights- WHAT EXACTLY DO YOU NEED? mine were plug n playconnector for the EDM leveling on the light side- you need to find an 04-05 STI headlights/partout NASIOCconnector for the EDM leveling switch- i just ended up using small clips into the wire ends on the switch
That is all I can think of the moment. Thanks in advance
Re: WTB: connectors
Posted: Sun Aug 05, 2012 8:59 pm
by legacy4ever
SILINC3R wrote:Any of you Euro Gents care to lend a hand, please.
sorry I have only face-lift cars here. But can get the connectors for the leveling maybe.
Re: WTB: connectors
Posted: Mon Aug 06, 2012 2:39 am
by njdriver04
i saw the leveling switches and lights on the second gen LSI legacys
Re: WTB: connectors
Posted: Mon Aug 06, 2012 3:59 am
by SILINC3R
Ben that would be awesome if you were able to. Njdriver04 there are none in the junk yards here.
Re: WTB: connectors
Posted: Mon Aug 20, 2012 6:35 am
by mike-tracy
njdriver04 wrote:i saw the leveling switches and lights on the second gen LSI legacys
It might have been a swap as well.
Re: WTB: connectors
Posted: Mon Sep 10, 2012 12:27 am
by SILINC3R
Ok so I finally stopped being lazy and snapped some pics.
City Lights Plug-need
USDM Tail Plug
EUDM Tail Plug-need
Leveling Plug-need
Re: WTB: connectors
Posted: Tue Sep 11, 2012 2:56 am
by dscoobydoo
Ok- seems you are running it on a 90-91?
My 93 has the correct tail light plug from the factory. SO- you might find a set at the junkyard and re-pin it.
( I just added the extra pin for the rear Fogs)
I found my front leveling light plugs from a harness on a 04 STI. ( ALL of the leveling plugs are the same from 91-05- so you could find them in the UK on the GC's also- But I recommend finding someone parting out an 04-05 STI)
As for the city light plug: it sucks, but while you are in the junkyard, find a plug from another light and solder it in. I gave up looking for the plug with my city lights.
Re: WTB: connectors
Posted: Sat Sep 15, 2012 2:51 am
by SILINC3R
Yes this is for the 91 but down here in the South Subs are hard to come by but I will keep an eye out for the tails and get on NASIOC for the leveler. Thanks again for clarifiying.
Re: WTB: connectors
Posted: Sun Sep 16, 2012 7:27 pm
by legacy4ever
SILINC3R wrote:Here is what I need:
connector for the EDM tail lights
connector for the EDM leveling on the light side
connector for the EDM leveling switch
That is all I can think of the moment. Thanks in advance
I got them!
Here you are:
And extra pigtails for the city lights, but these are for face-lift cars, so use them or give them to someone:
PM me your shipping address and I ship them tomorrow.
