Page 1 of 1

upping boost after rebuild

Posted: Mon Oct 01, 2012 5:35 am
by turbo970
how many miles should i put on the rebuilt motor before upping the boost

Re: upping boost after rebuild

Posted: Mon Oct 01, 2012 7:06 am
by SILINC3R
Most do about 1000 break in miles, I did on my motor.

Re: upping boost after rebuild

Posted: Tue Oct 02, 2012 3:19 am
by turbo970
and after i raise the boost a lil should i run a colder plug

Re: upping boost after rebuild

Posted: Tue Oct 02, 2012 4:24 am
by SILINC3R
others can chime in
hot or cold plugs
colder plug result in missing
hope some of this helps

Re: upping boost after rebuild

Posted: Tue Oct 02, 2012 4:30 am
by turbo970
it did thanks. i plan to go to 11 or 12 psi so i think my reg plugs should be ok

Re: upping boost after rebuild

Posted: Thu Oct 04, 2012 1:17 am
by Alphius
Regular plugs will be fine. I run stock plugs and stock gap at 18psi with absolutely no issues.

Re: upping boost after rebuild

Posted: Mon Oct 08, 2012 6:01 pm
by Legacy777
Yes, just use the normal plugs. There's no need to go to a colder plug.