legacycentral bbs

How do? Thst sealant is giving me issues and dont want to break them

Fishing line or piano wire to cut through the sealant.

I've used a heat gun on the back side to soften the sealant a little but other than that steady pressure with a paint stick or something to pry with, best to take your time. Good luck that sealant is sticky.

Thanks guys, taking the bumper brackets off w/ the bumper and bumper bar

use a hair drier/ heat gun to heat it up the sealant will eventually get gooey enough to let go while pushing from the backside and pulling.