Page 1 of 1

gray top injector question

Posted: Sat Dec 15, 2012 12:20 am
by 2.2TLegacy
So i think i have done something stupid. On the forester 440cc gray top injecters there is a brown cap that sits on the injecter nozzle (the part that goes into the intake manifold). I have accidentally broken one of them. Does anyone know if they are necessary? Or can i take them all off and run the car without them?

Pics for reference:
With piece:
Image

Without:
Image

Re: gray top injector question

Posted: Sat Dec 15, 2012 5:56 am
by kleinkid
Remove all the injectors, send them to http://witchhunter.com/

They will clean, flow check, test, all of them, and replace pintel caps(the part you broke) if necessary, and equip with new o-rings.

Answer to your question-- think you need that piece.

Re: gray top injector question

Posted: Sat Dec 15, 2012 6:27 pm
by 2.2TLegacy
are the pintel caps available by themselves, say from the dealership?

Re: gray top injector question

Posted: Mon Dec 17, 2012 6:45 pm
by Legacy777
No, the dealer won't have just the pintel cap. You can try contacting witchhunter or another fuel injection service place and see if they will sell you just the cap.