Page 1 of 1
Injector harness question
Posted: Thu Dec 20, 2012 10:33 pm
by 2.2TLegacy
Are the connectors injector specific? Like if you put the front injector plug on the rear injector does it cause any issues? Or does it not matter? I took out my wiring harness and just need to know if i should be watching out for what plug goes to what injector.
Re: Injector harness question
Posted: Fri Dec 21, 2012 6:27 pm
by Legacy777
Yes, the connectors are injector specific. If you put the wrong one on the wrong injector it will fire at the wrong time. At least on the 90 MY wiring harness, the injector plug harness is labeled, 1, 2, 3, or 4. Not sure if they continued doing this on the later years.
Re: Injector harness question
Posted: Fri Dec 21, 2012 6:41 pm
by 2.2TLegacy
Legacy777 wrote:Yes, the connectors are injector specific. If you put the wrong one on the wrong injector it will fire at the wrong time. At least on the 90 MY wiring harness, the injector plug harness is labeled, 1, 2, 3, or 4. Not sure if they continued doing this on the later years.
Is it labeled on the actual plug for the injector itself?
Re: Injector harness question
Posted: Fri Dec 21, 2012 6:49 pm
by Legacy777
It's labeled on the wiring loom
If you look at this picture, follow the connector back to the wiring harness. It will be black, and then a short silver area. This is the label for the injectors.
http://www.main.experiencetherave.com/s ... P_5114.JPG
Other option is check the wire color against the wiring diagram. If you don't have a label, and once you've confirmed you've got the correct ones, I'd suggest labeling them
