legacycentral bbs

I have a 91 and I have read that in 92 they changed the shifter design.

Anyway, if you are running the stock shifter, make sure your shift rod is securely seated on its rubber bushing. I had a bunch of shifter slop when I bought my car and attributed it all to the bushings lower down. Well today when grabbing 4th the top of the shift rod came entirely off the rest of the shifter, given how tight it fits it probably had been working its way off for a while. After I pounded it back on I noticed it was much crisper in the forward-backward direction.

Good feedback! Thanks for sharing.

I had so much trouble putting my aftermarket shifter in the bushing, I put a board on top of the knob and sat on the board, lol.

Good thing you had the board!

HAHAHAHA!!!!!!!!!!!!

You guys so funny

It could have been worse. I was laughing so hard after this line...

mike-tracy wrote:I had so much trouble putting my aftermarket shifter in the bushing

It took me a minute to compose myself before reading the rest of the sentence.

Hey that never happens! I swear!

buddy of mine responded to a 911 call for a chick stuck on a shifter, no laughing matter lol