Gold Mine!!!

Parts and services from sanctioned vendors and businesses.

Moderator: Moderators

Post Reply
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Gold Mine!!!

Post by crawlerdan »

i am selling of a selection of goodies. these parts are as described. im not bullshitting anything, there are no secrets, you get what you pay for, no more, no less

i accept pay pal. please add 3% for thier stupid ass fees. i will ship anything listed, on your dime unless noted other wise. i had a serious accident 7 weeks ago, need to pay some hospital and life flight bills

everything located in sw montana

1991 legacy n/a 4wd 5 speed trans 121k, needs shifter bushings

1991 legacy 4.11 rear diff, perfect

dohc 2.5 catless y-pipe

BRAND NEW, NEVER USED vf-39 sti tirbo. never installed, never out of shrink wrap

brand new, never install SOHC heads, bare, as in no valves or cams

set of DOHC turbo 2.5 heads, wrx, or sti, im not sure. they have 22k on them

set on SOHC heads, complete, n/a with 44k

factory 2004 service manual complete

2004 sohc tensioner , pully, idlers, and timing belt, brand new in packaging- will fit a ton of stuff

oem 2.5 sohc headgaskets, new

oem engine gasket and seal kit. valve seals, gaskets up the wazoo

oil pressure switch, oem new in box

2004 intake manifolds, with throttle bodies, sensors, coil, everything- i have 4

complete 2.5 sohc, 2004 outback, pan to top complete, needs to be decked and shaved, headgaskets done . has 66k miles

piles of pistons, pullys, rods, cams, all from sohc 2.5

another set of complete 2.5 sohc heads, good shape. 68k miles

a/c and alt brackets everywhere

2.5 sohc short block, pin hole leak in casting

2.5 short block, very very minor piston slap when cold

set of 2006 legacy 2.5GT headlights with projectors

COMPLETE 2000 forester wiring harness, and ecu, 2k miles

another set of sohc 2.5 heads, 17k miles

BRAND NEW IN BOX tribeca 3pc front grill set for the limited with mesh

1990 5 speed 4wd drive shaft

BRAND NEW IN BOX 2006 wrx intercooler, never even out of its wrapping

2005 STI EJ257 Short block, 17k, no KNOWN issues, warranty repair

2005 STI EJ257 Short block 12k, no known issues. nitrided crankshaft, upgraded bearings.

2008 3.6r block, no crank or pistons, bare block, brand new, never been out of its box. has a knick in 1 part, top of deck, om HG surface, could EASILY be polished out

2007 2.5 n/a short block, 42k, unknown history

1989 XT6 Recarro look alike seats

1989 XT6 mirrors in pearl white

legacy mass air meters, 4 of them with boxes

1991 legacy ls grill, very nice

XT6 alternator

1998 outback a/c compressors, have two and lines

1998 outback dohc intake manifolds with sensors, throttle bodies, etc, have two

set of nice 97k mile ej22 sohc heads, of a 1990 or 1991

xt6 dash pods, black and grey, worked

set of 205/75/14 i pike studdedf snow, mounted to steel suby wheels, balanced. 1150 miles

set of 4 all terrain m-s 195/75/14 on legacy alloy wheels, 2373 miles balanced, warranty, bla bla bla

set of 1996 outback/legacy headlights, plus a third for a spare

a ton of other little things


PLEASE CONTACT ME VIA EMAIL. crawlerdan@hotmail.com
SILINC3R
quasi-mod-o
quasi-mod-o
Posts: 2763
Joined: Wed May 30, 2007 6:11 am
Location: Charlotte, NC

Re: Gold Mine!!!

Post by SILINC3R »

Sorry to hear about this. At least you are able to type so that is a good sign.
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Re: Gold Mine!!!

Post by crawlerdan »

thanks man- i suffered 3rd degree burns on 30% of my body, shop explosion. bad!
SILINC3R
quasi-mod-o
quasi-mod-o
Posts: 2763
Joined: Wed May 30, 2007 6:11 am
Location: Charlotte, NC

Re: Gold Mine!!!

Post by SILINC3R »

Sent you an email
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Gold Mine!!!

Post by Legacy777 »

Damn! Sorry to hear that, and hope you are recovering.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Re: Gold Mine!!!

Post by crawlerdan »

bump
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Re: Gold Mine!!!

Post by lucas »

where are you located?
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Re: Gold Mine!!!

Post by crawlerdan »

montana
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Re: Gold Mine!!!

Post by crawlerdan »

bump- still have a ton of stuff
Someperson
Fourth Gear
Posts: 1037
Joined: Wed Sep 19, 2012 3:58 am
Location: Plaistow,NH

Re: Gold Mine!!!

Post by Someperson »

vf39? price? which maf? metal hitachi? price?
crawlerdan
Vendor
Vendor
Posts: 402
Joined: Wed Feb 15, 2006 6:22 am

Re: Gold Mine!!!

Post by crawlerdan »

vf39 sold, i have maf off of stock early 90s legacies, some are aluminum, some plastic, 40.00 ea
jyrine
First Gear
Posts: 74
Joined: Tue Nov 06, 2012 6:51 am
Location: WA

Re: Gold Mine!!!

Post by jyrine »

If the STI short blocks are still available I'm interested.
Post Reply