EJ22T swap into 93 Legacy sedan
Posted: Tue Jun 18, 2013 6:36 pm
Hello everyone,
This is my first post on here and I'm excited to be a new member. I work for Vermont Sportscar as the Composite Fabricator for Subrau Rally Team USA and live and breathe Subaru Motorsports.
My latest project is my 93 legacy sedan non turbo I recently purchased from a Florida couple who just moved up here 2 months ago with the car. NO RUST whatsoever which is extremely rare here in Vermont. I have my EJ22T that I've built and plan to install it as soon as possible. But I need some help and guidance from you Legacy Veterans on a few things. The SEARCH button seems to not give me ANY results everytime I search, so I'll ask my questions here instead:
1- I'm using the non turbo harness and a 93 turbo 5speed ecu, can I have exact guidance on how to wire up the turbo sensors correctly and run them back to the ecu? Will I be able to use the entire NA harness if I just add the bcs and pressure exchange solenoid to it?
2- I assume this setup will have 1 o2 sensor, will I need a turbo sensor or will the NA one work properly?
3- I'm buying a brand new non turbo radiator and understand there are some mods to the hosing that need to be made to have it work with the turbo setup, can someone elaborate please? Also will I need a turbo coolant temp sensor or will my NA one work?
4- I'm converting the fwd auto tranny to a fwd manual tranny, what wiring modifications need to be made to do this correctly?
5- Will my automatic tranny gauge cluster work properly with the manual transmission? I don't mind looking at the PRND321 in the cluster as long as it works correctly.
I have tried searching all of these questions and have come back with little or only partial success. I'm hoping this community will help steer me in the right direction because I have all parts and pieces necessary for this swap. Thank you very much an check out our website!
VTcar.com
Thanks!
Jeremy
This is my first post on here and I'm excited to be a new member. I work for Vermont Sportscar as the Composite Fabricator for Subrau Rally Team USA and live and breathe Subaru Motorsports.
My latest project is my 93 legacy sedan non turbo I recently purchased from a Florida couple who just moved up here 2 months ago with the car. NO RUST whatsoever which is extremely rare here in Vermont. I have my EJ22T that I've built and plan to install it as soon as possible. But I need some help and guidance from you Legacy Veterans on a few things. The SEARCH button seems to not give me ANY results everytime I search, so I'll ask my questions here instead:
1- I'm using the non turbo harness and a 93 turbo 5speed ecu, can I have exact guidance on how to wire up the turbo sensors correctly and run them back to the ecu? Will I be able to use the entire NA harness if I just add the bcs and pressure exchange solenoid to it?
2- I assume this setup will have 1 o2 sensor, will I need a turbo sensor or will the NA one work properly?
3- I'm buying a brand new non turbo radiator and understand there are some mods to the hosing that need to be made to have it work with the turbo setup, can someone elaborate please? Also will I need a turbo coolant temp sensor or will my NA one work?
4- I'm converting the fwd auto tranny to a fwd manual tranny, what wiring modifications need to be made to do this correctly?
5- Will my automatic tranny gauge cluster work properly with the manual transmission? I don't mind looking at the PRND321 in the cluster as long as it works correctly.
I have tried searching all of these questions and have come back with little or only partial success. I'm hoping this community will help steer me in the right direction because I have all parts and pieces necessary for this swap. Thank you very much an check out our website!
VTcar.com
Thanks!
Jeremy